i sell this product. www.toolcentral.com
toolcen2Member since 09/10/03
some units have a rapid fire as a separate item packed in the box when purchased. this may be installed. also, if you are using this in hand loose...
This is a very controversial subject. Depends on the size of sockets you are acquiring about. for instance,1/4 inch drive sockets are found in most...
Depending on what voltage you have. the most economical compressor is the 60 gal,2 cyl,v compressor,cast iron,14.6 cfm. This will accomodate a one ...
PORTER CABLE MODEL PORLL3100 IS A COMPACT 3 WAY LEVEL, HAS TRIPOD MOUNTING (STANDARD) AND IS ACCURATE TO +.5 -.5 HAS A YEAR WARRANTY AND LASER TO 1...
milwaukee model milw9012 is a 1/2 in,slip clutch hammer drill comb. has a 5 1/2 skillsaw,flashlight,and a hatchet sawzall. it comes with 1 hr nicad...
I have both of these products on my website. The 18 v milwaukee only comes with one battery. It is a 1/2 in chuck,with slip clutch.Has a slide batt...
simply take a look at my website www.toolcentral.com I have over70,000 sq ft of nothing but tools. anything you want.
there are 3 common sizes of finish nailers on the market. they are 18 ga,16 ca and 15 ga. the most common are 16 ga. which are larger brads "T" nai...
I dont think there will be a problem .You might test a small area before applying over complete area. If you are having mildew or molding problems,...
If the kitchen sink is close to your frige, purchase a saddle valve and put on cold water line of incoming water to kitchen faucet. you can use 1/4...
I have any type. porter cable,dewalt,hitachi,and import. 18 ga start at 19.99 and 89.99. I would not suggest an angle unit, as the brads are harder...
I current have a unit on promo porta cable 16 ga finish nailer,4 gal pancake compressor,regulator, hose for 299.99 also have 6 gal oil type 2 hp ...
why not velcro stripping. stick one to facing,cut the other long enough to go over or around your garland.
pair of left hand ofset hand shears; price is about 15.00. wiss or klein are quality product. I have these www.tool-central.com
you will get oversprays from all standard type guns. if you want to do this, use a hvlp gun. there will be no oversprays. I would suggest other ap...
this is a replaceable item and quite easily installed, the cost is aprox 13.00 .this valve is defective if popping off, and is running hot water un...
depneds on how much you need to spray before refilling container. I have a paint pot assembly with a one gallon container, a quart can, and a simpl...
check and see if the unit has more than one or two speed. it may be set in the high speed, or may look to see if all the shipping packing was remov...
this commode may have a crack or pitted spot in the throat which you cannot see. when flushed, does the unit fill above the level in bowl then siph...