not much experience in jacking floors but from building houses it seems to me that the beam should be under the bearing wall as well as half way on...
tygar663Member since 11/04/01
Concrete stain which you can find in home depot or lowes i also saw another one that is tougher than the stain it is like an epoxy paint be sure to...
floor or wall grout sanded or non sanded. wall grout it would be just as easy to scrape with grout removal tool and regrout with desired color.floo...
carpenter here. is there any electric in the wall that you want to move if so there will be problems electric in the ceiling will be out of the wa...
if the spots are not that big id go over it if you have to do all the seams you might want to put up 1/4" drywall over existing rock then tape and ...
furring strips are half the cost and wont make the room shrink by 8 inches, if there is plumbing to be in a wall then go with 2x4 where needed. per...
ahhh dont give up so easy the hardest part is cutting the carpet layout where the wall is going to be door and everything if there is a door cut th...
can you get into the attic and see it or is it between floors? if so you will need to cut an access hole in it to see make it big enough to look ar...
the forms will work but you need to put in a shower pan concrete is pourous and will leak sooner or later and be doing this again . the plumbing su...
lets see more insulation stronger walls the energy savings would pay for this upgrade in time id go with the 2x6
the b&d 10" miter saw is great i own one and love it i also have a dewalt 12" compound miter.the decision is up to you if you are going to just use...
Cement board, wonder board, durorock is the only way to go. be sure to remove enough tile to get a good the cement board nailed to the wall without...