Might be a case for clear polyurathane.I beleve it can be had in a satin finish if you dont want shiny walls. Experiment on scrap material, dont ju...
Easist way to pull the carpet, if its the type with rubber foam backing glued to the floor is to cut it into strips and pull. Scrape as much of t...
Redrill both holes. Move up or down as much as possible without uncovering the present holes. THIS TIME use a level to get it right.No more chances...
How old is the foam? For the last several years, the foam has the vapor barrier built in. If you have the plastic sheet, it wont hurt to use it. Do...
There is a nonflamable solvent to take off the adhesive.If any tiles are stuck tight, Dry ice (in a wood frame, to keep it in place) will help pop ...
If I had known I would have to type my user name each time,it would have been much shorter! There is a saw, I think its called keetsaw for cutting ...
I'ved installed floor covering since the mid fiftys with no health problems developing.The asbestos problem is overrated. How old is the tile? asbe...
Wow Mustang, dont get carried away, these are beginners looking for the basics to learn on, right? You cant go wrong with Black&Decker line, saws, ...
Most cinder block are soft enough to drive nails into by hand. But is wire the right approach? Why not sand blast the paint off.Better yet get advi...
My 1957 900sf house has a central gas furnace but no ac. The furnace is probably original. Would it need to be replaced to add central air or would...
most likely its delaminating, seperating from the backing, but give the strecher a try
u will also have a problem with thinset bonding to the vilyl adhesive. clean off as much as possible, use vilyl adhesive to glue Armstrong scribing...
is this a preformed top? u could cut through the back with a chisel. might be easist to use new plywood. do splash first to avoid damage to tile de...
we just had Mannington snaplock laminate demonstrated, we soaked some scrap overnight with no ill effects, even though the back looks like ordinary...