Hi,On a dark brown stained home,, a semi dark beige would look great, ( have painted that combo before ) Also white looks fine. You want to lighten...
WorkenstiffMember since 05/03/03
Hmmm, some possible problems may be, 1. The walls were not properly prepped for paint.(ie:washed, primed etc) 2. The walls were moist when they wer...
I would start with hot water and DIF. Spray it on with a portable garden type sprayer, ( 1 or 2 gal. etc)or a regular spray bottle, according to th...
acouple things remove crayons/markers off walls.. 1. use an all purpose oil lubricant, just a dab on a cloth , 2. or GOOP , the hand cleaner will ...
Also , if you are going to paint them , since you want them off white, thats a whole process in itself. They have to be cleaned/washed ,TSP is best...
This may seem "out there" but , use chains, a hammer, razor, ( to cut small pieces out ) and have at it. Just lightly hit the chain across the cab...
Depending on the wood type, youre probably going to have to use a oil primer to seal knots from bleeding through, if there are any in the wood. Kil...
By the way... gloss finish is highly washable, but it will make the walls look like plastic,,,,,,,,,,, satin/eggshell, great washability, nice low ...
You can use any finish you want on it. The norm is Satin or Eggshel finish in the color of choice. Yes you can roll it on, If there are grooves fro...
A little bit confused here. First, the way I read you , is that there was a textured paint already on the walls, ( or why else would you remove it)...
Questions here. Removing the filler from what? Paneling, real wood,? etc. Sine you mentioned nail holes I assume walls. Wood filler is dense and no...
To fix the problem, scrape as much of the area as you can. Don't get to aggresive cause you may be scraping the whole ceiling with popcorn paint!Ju...
Theres not a whole lot you can do about you're situation. If the paper is vynal , you could use a solution of DIF and water and try to wash it down...
I would just take some mudd, or spackling compound and feather it in where the tape took the paint off, then sand that area lightly and repaint ove...
There are many different "designs you can do, depending on youre personal taste and how wild you wanna ge! Youre idea black and then sponging on re...
Use plaster patch , fill the holes and sand smooth, thats it.
Was the contractor bonded or insured?? If he wasnt,,,theres not a whole lot you can do, besides legal representation to try to sue. But he wasnt b...
Yes you can paint them , get TSP from the hardware store or paint store, (its a cleaner) clean the surface, sand them down, TO GET THE GLOSS OFF ...