BobVila.com home page

Installing Basement Drainage Solutions and Sump Pumps

Bob reviews two types of water barriers installed in the basement to prevent water intrusion. The water barriers block moisture that comes through the walls and channel it into a perimeter drainage system in the floor. Larry Janesky of Basement Systems reviews the WaterGuard system and explains how the pipes are set to a proper elevation by backfilling with crushed stone. Pitching the pipes makes the water drain into a sump hole where it can be pumped out of the home. Janesky shows Bob the WaterGuard ports that open into the embedded channels for inspection or cleaning, and provide a drainage outlet for the dehumidifier. Janesky then reviews the TripleSafe Sump Pump and how it works to pump collected water out of the home. The system uses three pumps to minimize the risk of flooding by pump failure. The primary pump has a secondary backup pump in case the it fails or becomes overloaded. Both pumps are hardwired into the home's electrical system. Each pump has its own discharge pipes so that the system will not be overloaded by increased demand. A third pump is battery-operated in case of power failure. An alarm sounds when the battery-driven pump kicks in to alert the homeowner so that power can be restored before the battery runs down. IceGuard fittings have been put on the discharge pipes outside so that water will clear the home even if the underground discharge pipes are frozen. More information