Installing Systems to Keep Water Out of the Basement

Rating:

Log in to rate this video - Click Here

Read Video Description

Installing Systems to Keep Water Out of the Basement

CLOSE

Larry Janesky of Basement Systems reviews the work being done to cut a drainage trench in the concrete around the perimeter of the basement floor. Water will be channelled through the trench to a sump, where it can be pumped out of the home. The sump hole was dug at the lowest spot in the basement as determined by laser level. CleanSpace is being installed over the walls as a vapor barrier to drain water from the walls to the drainage system. It is possible to install CleanSpace in crawlspaces as well as in basements to prevent water buildup in underground walls and eliminate rot and mildew. Janesky recommends taking these two steps in securing the drainage of a home and to secure against all outside air leaks. The final step is to dehumidify the crawlspace. Janesky points out a corner of the basement where the Thermal Dry Wall System has been installed. This product goes behind finished walls and drains water like CleanSpace but also reflects heat generated in the basement back into the basement. Janesky then shows a portion of the floor where the Water Guard Drainage System has been installed in the drainage trench and secured with cement. More information

Email this video to a friend

E-Mail to a friend!

CLOSE

Note: The sender's and recipient's email address are used only to send the link on your behalf. They will not be used for any other purposes or stored in our database without your permission.






 

About | FAQ | Contact | Sitemap | Privacy Policy | Terms of Use | Help
© BobVila.com 2008