BobVila.com

Moisture Content and Vapor Barrier for Wood Floors

For proper installation, wood flooring should be allowed to acclimate to its surrounding environment before it is installed. Too much or two little moisture in the flooring can cause it to bow, buckle, split, or crack after it is installed. In the dining room, Brickman shows Bob two ways to measure the moisture content of wood. The first is a traditional moisture meter that is stuck into the floor. The second is the FloorWatch system, which can be monitored remotely. The FloorWatch system monitors moisture levels, temperature, and relative humidity. It can be accessed over the phone or via a Web site. Before putting the floor down, Brickman applies a vapor barrier that is similar to an ice shield used in roofing. A different floor fastening system is being used in this room; rather than the nailing technique used elsewhere in the house, Brickman uses screws and wood plugs. More information