BobVila.com

Replacing the Gutters

The Melrose home had only one gutter left on the front, which had been neglected and was clogged with muck. In the back of the home, a vinyl gutter had been installed by the homeowners. New England Gutter Kings were called in to install a seamless aluminum gutter system. The old gutter was removed and the lengths were carefully measured. Heavy-gauge sheet aluminum was measured and extruded right out of the truck in front of the house. This 32-gauge aluminum holds the profile of the gutter well and will stand up to years of abuse and cleaning. It also gives the profile of the crown molding. Only about eight feet of fascia board needed to be replaced, so western red cedar was used before the gutter was installed. The installation required three people and is set on a slope to drain the water out to the street and sewers. More information