BobVila.com

White Oak Hardwood Flooring Installation

Now that the WarmZone radiant-floor heat has been installed, it's time to put the finish flooring on. The homeowners selected a Bellawood white oak, tongue-and-groove floor with an oxidized finish for a 50-year guarantee. Since the flooring will be nailed over the hyrdronic heat tubing, it is critical to avoid puncturing the tubes. General contractor Tim Berky is installing the flooring perpendicular to the tubing, which allows him to see the Pex at all times and avoid nailing into it. Berky shows Bob how he began the installation with the second course cut to receive the supply and return pipes and sited half way over the first loop, which initially runs parallel to the wall and is hidden from view. By starting his courses this way, he can set the power-assist nailer to drive the two-inch galvanized staples at an angle just above the tongue without fear of puncturing the tubing. While Berky shoots the staples, Bob points out how the entire floor and substrate is effectively a green application since it is all wood, which is a renewable resource. The advantage, he says, is that trees are planted every time the resource is used, resulting in increased planting and forest protection. The wood floor will cover the entire space, even under the cabinetry and appliances, to create an even floor and provide full finish flooring should the homeowners wish to remodel in the future. More information