My name is Jack Schoppa. I have acquired an old band saw. No brand name, no exterior case and no markings on frame. It is the three wheel kind with a separate motor with a three sproket wheel to adjust blade speed. All of the wheels are aluminum so I assume it is likely some Taiwan thing, but it is obviously old. I would like to rebuild it.
I need:
1) a rubber drive belt,1/4 inch in diameter and about 26 3/4 to 27 inches long, or around.
2) 3 blade wheel "tires", 1/2 inch width, 6 1/2 inch diameter, about 20 1/2 to 20 3/4 inch circumference.
Any help would be greatly appreciated.
Jack Schoppa
Phone: 940-995-2987
jack@northtexasproperties.com
Post Reply
Watch this Post
