View ChannelsFeatured: Paint & Wallpaper
View ShowroomsFeatured: Western Red Cedar Lumber Association...

BobVila.com

Home

furnace problem

Posted by jamiearnold on April 24th, 2003 05:25 AM
In reply to Furnace Problems by David on December 8th, 2002 03:05 AM [Go to top of thread]

Post Reply |

Watch this Post

Sounds like the cad cell is not seeing the flame,put a ohms meter on the two yellow wires while it is running,it should read 1000 ohms or less if its a oil burner

Was this post helpful? Yes: or No:

Post Reply

Topic History:

gas furnace problem by Jerry 10/3/99 09:40 AM (: 20, : 15)
Limit Switch failing? by Glenn 12/2/99 04:44 PM (: 2, : 0)
140000btu colman gas furnace by Bob G. 11/6/02 08:55 PM
Furnace Problems by David 12/8/02 03:05 AM (: 8, : 0)