BobVila.com

Home

Deckmate screw specs

Posted by Kevin Gilfillan on May 16th, 2003 09:24 AM
In reply to DeckMate Coating by Mr. Lowes on April 28th, 2003 02:19 PM [Go to top of thread]

1 of 1 people found this post helpful

Post Reply |

Watch this Post

I believe Deckmate only has a single layer coating. So when you drive the screws, yes, the coating has a tendency to chip off. Other screws have 2-3 coatings which minimizes or eliminates the problem. So moisture doesn't have a place to enter and rust isn't an issue.

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Composit Decking by Kevin 7/28/02 07:59 PM (: 1, : 0)
You can by Moderator, Steve 7/29/02 01:29 PM
use deck mate screws by Sean Maltais 7/29/02 03:37 PM
If this is the screw that by Moderator, Steve 7/29/02 09:36 PM
deck-mate screws by joe collins 12/8/02 10:01 AM
DeckMate screws by doug seibert 12/9/02 05:04 AM
Deck Mate Screws by Joe Collins 12/10/02 11:01 AM
deckmate by ryan 12/10/02 03:54 PM
Deck mate screws by Joe Collins 12/11/02 01:09 AM
Deck Mate Screws by Mr. Lowes 2/14/03 08:53 AM
Deckmate screw specs by Jim Anderson 3/12/03 11:59 AM
DeckMate Coating by Mr. Lowes 4/28/03 02:19 PM