 |
Possibly dried
Posted by kevin on August 7th, 2003 10:39 AM
In reply to crack in newly sanded and polyurethained floors by sandy on August 7th, 2003 07:03 AM [Go to top of thread]
The only thing I can think of is that when they sanded it, the wood itself was exposed and dried, which is normal. The wood then had a crack initiation site, which propagated once you began to walk on it. If it's "large" (e.i. greater than 1/16", or large enough for filler) fill it in with a good wood filler, or good glue (e.g. PL400) and put saw dust on the top. Then urethane over the top and then only you should know it's there. Good luck. Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
