Corner cabinet crown molding cuts

Posted by Richard Manuszewski on August 25th, 2003 02:59 PM
In reply to 45/45 mitre and bevel angles by brenshaw on June 8th, 2003 10:58 AM [Go to top of thread]

1 of 1 people found this post helpful

Post Reply |

Watch this Post

Moderator Post:
> Cutting Crown Molding by Handyman on 05/19/2005

I'm trying to mount crown molding on my kit.cabinets. Is there a trick to getting the correct mitre and bevel on a compound mitre saw ?
The angle between the two surfaces is 135 degrees.
I'm using the chart for mitre and bevel provided by the saw mfgr. But it's somewhat off. Please help. Thanks

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Crown Molding Miter Cuts by Kurt A. Blevins 1/5/98 11:57 AM (: 1, : 1)
Cutting Crown Moldings - Compound Mitre Cuts by Dan Rudman 1/5/98 03:08 PM (: 1, : 5)
mitre cuts by McArthur McKinnon 4/16/98 07:36 PM
compound mitre cuts by bob caceci 11/26/99 10:46 AM (: 2, : 0)
horizontal crown molding ,inside and outside corners. by allen gabriel 9/29/02 12:39 AM
45/45 mitre and bevel angles by brenshaw 6/8/03 10:58 AM

Topic Follow-ups:

Compound Mitre Cuts by Emmett Wood 8/28/03 08:00 AM
CROWN MOLDING MITRES by RAY GARCIA 1/18/04 07:01 AM
compound mitre cuts by Tim Burris 2/6/04 01:34 PM
Compound miter cuts by Micheline Menendez 10/13/03 10:37 PM
angles for setting compound mitre saw by Steven Okeefe 11/5/03 08:11 PM
compound mitre cuts by Tim Burris 2/6/04 01:35 PM
inside corner cuts on kit cab by dale favor 2/23/04 12:32 PM

BobVila.com

Corner cabinet crown molding cuts