View ChannelsFeatured: Fireplaces
View ShowroomsFeatured: SprayFoamDirect.com - DIY Foam Insula...

BobVila.com

Home

DeckMate Driver Bits

Posted by Jesse on September 20th, 2003 10:17 PM
In reply to Deck Mate Driver Bits by Ken Grubb on July 7th, 2003 02:18 PM [Go to top of thread]

Post Reply |

Watch this Post

I have only been able to find DeckMate Driver bits, for Phillips screws, in size "3" at Home Depot. Where can I get DeckMate Drivers that will fit size "1" and "2" Phillips heads screws??

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Composit Decking by Kevin 7/28/02 07:59 PM (: 1, : 0)
You can by Moderator, Steve 7/29/02 01:29 PM
use deck mate screws by Sean Maltais 7/29/02 03:37 PM
If this is the screw that by Moderator, Steve 7/29/02 09:36 PM
deck-mate screws by joe collins 12/8/02 10:01 AM
DeckMate screws by doug seibert 12/9/02 05:04 AM
Deck Mate Screws by Joe Collins 12/10/02 11:01 AM
deckmate by ryan 12/10/02 03:54 PM
Deck mate screws by Joe Collins 12/11/02 01:09 AM
Deck Mate Screws by Mr. Lowes 2/14/03 08:53 AM
Deck mate driver bits by karen 6/2/03 10:19 AM
Deck Mate Driver Bits by Ken Grubb 7/7/03 02:18 PM