 |
Electric furnace
Posted by Gary on October 11th, 2003 01:50 AM
In reply to Furnace won't come on. by Fred on September 29th, 2003 01:14 PM [Go to top of thread]
Electric furnaces are usually very simple, like a fan blowing over a toaster. Often, in milder climates (I'm from Minnesota), you won't notice a decrease in heat output until all the "toaster" elements burn out (there could be 4-6 of them). That's my guess as to your problem. Turn off power and check for continuity across each element's terminals, after disconnecting the wires. If the circuit is open, that element is burned out. The elements are quite inexpensive and easy to replace. Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
