View ChannelsFeatured: Lawn & Garden
View ShowroomsFeatured: Western Red Cedar Lumber Association...

BobVila.com

Home

In Reply to: lighting the pilot light in my gas furnace

Posted by larry on November 4th, 2003 05:24 PM
In reply to lighting my furnace by Don Fehmel on November 4th, 2003 11:00 AM [Go to top of thread]

Post Reply |

Watch this Post

make sure gas is on turn valve to pilot push down while holding a match to pilot continue holding for about 15 seconds till themocouple gets hot.release and turn valve back to on. hope this helps.

Was this post helpful? Yes: or No:

Post Reply

Topic History:

oil furnace by Marsha 9/19/00 10:25 AM (: 1, : 0)
Furnace Repair by Harold Kestenholz - Hydronic Network 9/19/00 06:10 PM
Gas Furnace Problem by Marc Stadler 11/11/00 11:02 PM (: 2, : 0)
Furnace Pilot light wont stay lit by Richard E. Wright 10/27/02 08:12 AM (: 3, : 1)
after I light the pilot light the furnace does not stay lit by bigmac 11/22/02 02:26 PM
lighting the pilot light in my gas furnace by ray.dzombak 5/11/03 04:10 PM
lighting my furnace by Don Fehmel 11/4/03 11:00 AM

Topic Follow-ups:

pilot light goes out by Colleen Ulbrich 12/10/03 03:00 PM
Pilot light by Rick 12/15/03 09:02 AM
Pilto light by chris arnold 4/2/04 09:07 AM
American Standard furnace by Lance Lewis 12/17/03 09:24 AM
Coleman furnance - where is pilot? How do I light? by James 2/25/04 01:01 AM