Drywall curves..............

Post Reply | Watch this Post

You frame the wall using Four 3/4" plywood "plates"......curved sections.....bandsawn to shape......Two top plates.......two bottoms........

The studs are placed close together to define the curved wall and support the drywall.......

Wet thin (1/4") drywall and drape between two supports....allowing the board to bend......

Attach the drywall with screws starting at one side and working across the sheet....assuring good contact with the studs.......

Repeat with a second layer of the thin board......skimcoat any imperfections.........