View ChannelsFeatured: Workshop
View ShowroomsFeatured: White Lightning Caulk - Caulks and Se...

BobVila.com

Home

cutting crown moulding

Posted by chris bader on January 20th, 2004 05:30 PM
In reply to Joining Corners by Jeff on November 20th, 1998 09:51 PM [Go to top of thread]

Post Reply |

Watch this Post

Moderator Post:
> Mitre Cuts and Crown Molding by Handyman on 05/19/2005

I've been told that there is a formula for cutting crown while its lying flat on my miter saw table.....what im doing is making outside corners out of three pieces which are about 11 degrees per cut....it would be much easier and more uniform if i could cut them laying flat on my table.... any help would be appreciated ...thanks..... Chris

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Crown Molding by Margaret Minto 9/7/97 01:33 PM (: 9, : 3)
Crown Molding Response by Terry Alexander 9/8/97 10:35 AM (: 1, : 5)
Crown Molding by Margaret Minto 9/8/97 07:04 PM (: 1, : 1)
Crown Molding - You by Terry Alexander 9/9/97 03:27 PM
Crown Molding - You're close! by Terry Alexander 9/9/97 03:32 PM (: 1, : 1)
how to cut cove moulding by seumas maccombie 9/9/97 06:23 PM (: 2, : 9)
Crown Molding Thanks by Margaret Minto 9/10/97 03:38 PM
crown molding by Anne 10/12/97 02:25 PM
Crown molding by Hal Jorgensen 10/24/97 12:42 PM
CROWN MOLDING by TONY ALLEN 12/2/97 01:58 PM
crown molding book by John Shutz 1/4/98 10:21 PM
Crown Molding/Coping by Laurie Judd 1/7/98 10:05 PM (: 2, : 1)
After Coping the 45 degree cut on crown molding by Jim Jenkins 2/16/98 10:37 PM
Joining Corners by Jeff 11/20/98 09:51 PM

Topic Follow-ups:

help by me 3/24/04 11:27 PM