View ChannelsFeatured: Roofing & Siding
View ShowroomsFeatured: InsWeb - Homeowners Discounts Online

BobVila.com

Home

compound mitre cuts

Posted by Tim Burris on February 6th, 2004 01:34 PM
In reply to Compound Mitre Cuts by Emmett Wood on August 28th, 2003 08:00 AM [Go to top of thread]

Post Reply |

Watch this Post

Moderator Post:
> Cutting Crown Molding by Handyman on 05/19/2005

I'm building an outdoor "yard ship." I'm having trouble putting the sides on the ship. The upright braces are at a 7 degree angle and the platform angle is 15 degrees. How should I set the mitre saw to get a tight fitting joint? Thanks in advance.

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Crown Molding Miter Cuts by Kurt A. Blevins 1/5/98 11:57 AM (: 1, : 1)
Cutting Crown Moldings - Compound Mitre Cuts by Dan Rudman 1/5/98 03:08 PM (: 1, : 5)
mitre cuts by McArthur McKinnon 4/16/98 07:36 PM
compound mitre cuts by bob caceci 11/26/99 10:46 AM (: 2, : 0)
horizontal crown molding ,inside and outside corners. by allen gabriel 9/29/02 12:39 AM
45/45 mitre and bevel angles by brenshaw 6/8/03 10:58 AM
Corner cabinet crown molding cuts by Richard Manuszewski 8/25/03 02:59 PM (: 1, : 0)
Compound Mitre Cuts by Emmett Wood 8/28/03 08:00 AM