 |
Hydrosil wiring
Posted by Michael on February 14th, 2004 03:12 PM
In reply to Tim's Left-Over 8' Hydrosil by John F. Coates on February 10th, 2004 03:46 PM [Go to top of thread]
Hydrosil owners,
I'm installing an 8' 220 V fixed Hydrosil unit in my basement. I'm a bit unclear on the wiring for this thing. I also have the high end TMEP-1-PTS themostat mounted on the wall an all the wireing is in place. My question is how to wire it. Hydrosil unit has 1 black, 1 red, and 1 green wire, and what looks like a ground termainal exposed. Source wire has 1 black, 1 red, 1 white and 1 ground exposed. How do these get wireed? My assumption, black to black, red to red, white to green, ground to ground terminal.
Also the thrumostat has two black wires and I assume this connects the two black wire of the supply line and hydrosil line. The rest tie directly together.
Just looking for some confirmation befor I break something... Hydrosil instructions are lacking in my estimation.
Thanks,
Michael Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
