Crown Moulding

Posted by Doug Platt on February 17th, 2004 06:18 PM
In reply to CROWN MLD CUTS INSIDE AND OUTSIDE by SCOTT POE on February 13th, 2004 03:03 PM [Go to top of thread]

Post Reply |

Watch this Post

Moderator Post:
> Cutting Crown Molding by Handyman on 05/19/2005

I am about to attempt to install crown moulding in my dinning room and would appreciate any help
you could give on how to cut inside and outside
corners. I have a compound mitre saw but no charts to follow.

Regards D. Platt

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Crown Molding Miter Cuts by Kurt A. Blevins 1/5/98 11:57 AM (: 1, : 1)
Cutting Crown Moldings - Compound Mitre Cuts by Dan Rudman 1/5/98 03:08 PM (: 1, : 5)
compound mitre cut by ROGER 3/13/99 02:56 PM
compound mitre cuts by Frank Vandecruys 8/3/00 04:50 PM (: 1, : 1)
excel sheet for crown moldings by Ronald Woodruff 10/1/02 06:27 PM
miter cuts for crown molding by farah h. lowe-bey 10/15/02 02:42 PM
Crown Molding by Norma 1/11/03 05:13 PM (: 1, : 0)
cutting crown mold for ceilings inside and outside corners by mitchell conner 1/30/03 11:52 AM (: 1, : 0)
HELP!! by Dave Schuster 4/1/03 09:00 PM
Outside corners for crown molding by Glenn Roberts 4/26/03 02:06 PM
MITER CUTS by ted lucuk 4/26/03 10:19 PM
FREE INFORMATION, CROWN MOULDING CUTTING by Jay 7/30/03 04:58 PM
FREE INFORMATION by Jay 7/30/03 05:55 PM
Crown Moulding Mitre Corner cuts by Mike Leys 9/26/03 09:53 AM
CROWN MLD CUTS INSIDE AND OUTSIDE by SCOTT POE 2/13/04 03:03 PM

BobVila.com

Crown Moulding