View ChannelsFeatured: Fireplaces
View ShowroomsFeatured: Dremel® - Repair. Remodel. Restore

BobVila.com

Home

wax motor and board failure

Posted by Brian Patterson on June 10th, 2004 08:51 AM
In reply to Failure to Spin Due to Electronics Failure by Mark Middione on March 25th, 2004 12:45 AM [Go to top of thread]

Post Reply |

Watch this Post

Moderator Post:
> Maytag Answer to Most Posts - Class Action Settlement by Handyman on 11/29/2004

I also experieced the wax motor/control board failure. Mark Middione mentioned that R11 goes to the base of an NPN transistor. If you mean Q6. This is actually a triac not a transistor. It is a Motorola MAC97A6.

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Washing machine stops frequently.... by Mark H 9/30/00 10:32 PM (: 18, : 9)
maytag neptune washing machine by joe nagel 10/17/02 06:18 PM
Maytag Front Loader washing Machine by Mark & Judy Kremer 12/5/02 09:53 PM (: 9, : 3)
Maytag Neptune problem by Robert 12/17/02 11:00 AM (: 1, : 1)
Maytag Neptune Problem by Rocky Harding 10/31/03 11:51 AM (: 2, : 0)
Maytag Neptune Problems by JMGREEN 1/10/04 01:15 PM
NEPTUNE PROBLEMS by MARK 1/13/04 01:26 PM
Facts from someone in the know by The maytag man 1/17/04 04:56 PM (: 1, : 0)
My 3-yr old Neptune has me pulling my hair out by Tod Jordan 1/23/04 10:04 PM
neptune washer by bob's buddy 2/11/04 03:40 PM
Failure to Spin Due to Electronics Failure by Mark Middione 3/25/04 12:45 AM (: 2, : 0)