 |
Check the mounting surface of the
Posted by deecee on October 14th, 2004 12:16 PM
In reply to tiller's lost it's spark by Unregistered-fred on October 14th, 2004 08:25 AM [Go to top of thread]
magneto coil. Often the coil is bonded on one end of the coil circuit by attachment to metal mounting plate sort of like a negative ground in a car. If this mounting is rusted, oily or etc, that side of the primary circuit is broken. Sometimes the connection is the bolt mounting hole. Check for good clean metal however the coil mounts. Luck, Kizmet
ps, disconnect the capactitor, it may be new but that's no guarantee it's not shorted. Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
