little confused

Post Reply | Watch this Post

Moderator Post (s) for this thread: > Who makes it by doug seibert on 01/18/2005 > Donmac.....Check the dataplate for the Voltage!!!!!! by doug seibert on 01/21/2005

Jasper,

You stated this:

* Right side upper post, where Light wire connects is jumpered to "Left Side Lower post.
* Left Side Center is connected with 'Right side center then is wired to "110 volts".

the first part i understand, but the next suggestion is a little unclear. Are u telling me i need a second jump from left side 110 to right side 110?

Just to be on the safe side, all commons are to go to the Left side (example: upper right would be HOT light and upper left would be COMMON light)