We will be replacing our kitchen countertops soon and there is a window by the sink. The window sill is only 2" above the present countertop which is just a sheet of formica glued atop the plywood cabinet top. I will pull the formica off the cabinet top, then fit the new countertop on top of this, leaving the plywood there. My question is what to do around the window; should I leave the back splashguard on the new countertop full height and above the window sill or cut it to fit under the sill? I hope you can understand what I'm describing. Any advice greatly appreciated, thanks. TedK
Post Reply
Watch this Post
