Topic History:

• Crown Molding Miter Cuts by Kurt A. Blevins  1/5/98 11:57 AM (: 1, : 1)
• Cutting Crown Moldings - Compound Mitre Cuts by Dan Rudman  1/5/98 03:08 PM (: 1, : 5)
• compound mitre cut by ROGER  3/13/99 02:56 PM

Topic Follow-ups:

• compound miter cuts by rod beehner  9/17/02 09:07 AM
• Compound Mitre Cuts by Matt Daniels  11/10/02 03:41 PM
• mitre cuts by Bruce Burns  6/8/03 09:59 AM
• MITRE CUTS by RICHARD STARKE  12/31/03 09:49 AM
• Mitre cutting wood to replace outside trim by Cathy Fitzgerald  3/2/04 08:38 AM
• Compound mitre cuts by Robert A Siedentopf  1/20/03 02:45 PM
• compound miter cuts by Barbara Veltri  5/25/03 04:53 PM
• Compound Mitre cuts by Ben Marshall  8/8/03 08:16 AM
• compound miter cuts by Paul Gomez  11/15/03 06:09 PM
• compound miter cuts by Nick Constantin  11/23/03 01:47 PM
• Excel Spreadsheet by Mite R. Saw  2/25/03 10:39 PM
• Compound mitre cuts by John Stephan  3/15/03 09:11 PM (: 1, : 0)
• Compound Mitre cuts and exell spreadsheet by Martin  5/8/03 11:34 AM
• compound mitre cuts by Jeanne Lacey  6/6/03 10:33 AM
• Crown Molding Jig by CK  7/1/03 11:54 AM
• Forget about the Rockler jig! by Jay  7/30/03 04:35 PM
• Excel Spreadsheet for miter cuts by Thaddeus Lemelle  8/8/03 09:09 AM
• Miter spreadsheet by Jon McWhorter  8/27/03 12:45 AM
• ExcelSpreadsheet For Miter Cuts by Gary E. Bergfield  9/1/03 04:50 PM
• excel spreadsheet by JEFF  10/16/03 03:37 PM
• Spread Sheet for Miter Cuts by Frank  10/22/03 12:45 PM
• Excel Spreadsheet by Rusty Pancamo  1/2/04 06:04 PM
• spread sheet for mitre cuts by leo clark  1/4/04 08:44 AM
• excel spreadsheet by jason  2/21/04 11:12 PM
• otolaryngology patient files by betty campbell  4/14/04 07:31 AM
• excell spread sheet for mitre cuts by les mac donald lesmacd@stis.net  5/13/04 08:23 PM
• compound mitre cuts by Paul Quayle  6/30/04 10:52 AM
• Miter Cuts by Frank  10/22/03 12:46 PM
• Spread sheet for miter cuts at catherdral cieling by Mike Farmer  11/2/03 02:50 PM
• cuts at catherdral ceiling by danielle donnelly  2/14/04 10:58 PM
• excel spreadsheet for miter cuts by lance sweeten  2/11/04 07:25 PM
• Miter spreadsheet by Tyson Whitten  2/21/04 12:57 PM
• excel spreadsheet for miter cuts by David McKeever  4/14/04 10:43 AM
• Excel spreadsheet for compound mitre cuts by Carl Wampole  6/6/04 10:11 PM
• Compound Mitre Spreedsheet by Bob@Schmeling.com  4/14/04 05:06 PM
• Miter cuts by L.Durkan  3/23/04 02:43 AM
• Crown Moulding Jig- excell sheet by Joey Rinella  3/23/04 09:39 AM
• Well without your eddress.................. by doug  3/23/04 01:26 PM
• Send the excel spreadsheet please. by Mac Wilson  4/25/04 02:56 PM
• Crown Moulding Jig- excel sheet by Joey Rinella  3/23/04 09:42 AM
• Compound miter spreedsheet by dhatley4@comcast.net  4/21/04 12:35 PM
• Excel spreadsheet for cutting crown molding by Phil Stark  7/14/04 03:22 PM
• Send an e-mail request to: by Excel  7/14/04 03:33 PM
• Crown Moulding by yellow555  4/20/05 09:05 PM
• Excel Spreadsheet by Ray  8/9/03 05:33 PM
• Miter Cut HELP!!!!!! by Dean Livengood  8/10/03 09:16 PM
• kitchen cabinets crown molding trim by mary  9/14/03 08:04 AM
• mitre cuts by pat harwood  12/30/03 04:23 PM
• excel spreadsheat for cutting crown moulding by Lars Wright  2/2/04 12:26 PM
• excel spreadsheet by LANCE SWEETEN  2/11/04 07:20 PM
• need excel spreadsheet by Tim  6/28/04 04:53 PM
• Baseboard too wide for Miter Box... what do I do? by Pamela  2/24/04 06:42 PM
• molding-miter cuts HELP!!!!!! by Robbin  3/15/04 03:19 PM
• cabinet crown molding by Keith Peifer  2/14/04 11:29 AM
• Mitre Cuts for Crown Molding by Mike Hemmen  2/15/04 10:39 PM
• installing crown moulding by jim smith  4/14/04 03:54 PM
• cutting crown molding by munter@ncis.com  5/15/04 10:21 AM
• MITRE CUTS by JZLOCKIE@COMCAST.NET  5/12/04 11:07 AM
• excel spreadsheet.... by r jay  8/17/03 11:37 AM
• Excel Spreadsheet for Mitre Cuts by G. Mackay  12/15/03 09:59 AM
• compound mitre saw cutting angles for crown molding by BillyJoBob2  9/14/04 07:29 AM
• excel spreadsheets for mitre cuts by bmkupchik  3/27/04 09:46 PM
• spreadsheet at The Badger Pond: by doug  3/28/04 12:26 AM
• Crown molding by Tom Wittig  9/8/03 09:02 PM
• crown molding on rounded corners by jade del sol  10/8/03 08:48 AM (: 3, : 2)
• Excel Spreadsheet by Thomas  10/12/03 02:02 AM
• Exell Spread sheet by Mike  3/6/04 04:23 PM
• Excel Spreadsheet by Phil Carpenter  1/3/04 10:36 AM
• Excel Spreadsheet by C Scramuzza  1/4/04 07:26 AM
• Excel Spreadsheet by David Bradley  1/4/04 05:22 PM
• Excel Spreadsheet by Jim Alekna  1/5/04 02:06 PM
• Excel Spreadsheet by Mike  1/7/04 11:33 PM
• Excel spread sheet by gduke  1/22/04 06:30 PM
• crownmoulding by peter finnerty  3/7/04 05:43 PM
• Need Spreadsheet BAD ! by Regina Spiker  1/29/04 06:57 AM
• Forget the spreadsheet............ by dougseibert  1/29/04 01:51 PM
• Excel Spreadsheet by David  2/17/04 05:40 PM
• Excel Spreadsheet by Dan Whelahan  2/22/04 09:31 AM
• excell sheet for cutting compound miter cuts on crown molding by George R. Allen Sr.  3/7/04 10:40 PM
• excel spreadsheet by bryan buckler  3/8/04 07:18 AM
• excel spreadsheet by George  4/6/04 03:59 PM
• Excel Speedsheet by Pierre  4/12/04 11:28 AM
• excel spreadsheet by Scott  4/19/04 09:09 AM
• Post your eddress by mailman  4/19/04 09:43 AM
• spread sheet please by mac wilson  4/25/04 03:07 PM
• Miter spread sheet by Tom  5/20/04 03:48 PM
• excel spreadsheet for miter cuts by Daniel  5/30/04 11:30 AM
• Excel Spreadsheet by billexecpc  1/26/05 12:53 AM
• Compound Mitre cuts and exell spreadsheet by Michael Livingston  7/5/03 07:43 AM
• Check this out by TL  7/17/03 11:02 AM
• Reply to "check this out" by Jay  7/30/03 04:29 PM
• Thanks Jay............... by doug seibert  7/31/03 06:33 AM
• You are mistaken, it works great by TL  8/1/03 02:00 PM
• Excel sheet on compoound miter angles by chuck  8/14/03 11:07 AM
• excell sheet by Doug Pierce  8/24/03 12:04 PM
• excel spreadsheet for miter angles by Barb Wright  1/2/04 11:29 AM
• Excel Spread Sheet by Roger  1/24/04 08:05 PM
• Excel Spread Sheet by David  1/31/04 05:31 PM
• Crown Molding excel spreadsheet by Mark Artesani  6/23/04 05:14 PM
• Crown molding cut on a compound miter saw by Frank  10/22/03 05:59 PM
• Compound mitre cuts by Janel  11/22/03 11:55 PM
• Mitre Saw cuts for moldings by Regina  11/27/03 07:23 AM
• excel spreadsheet mitre sheets by Wayne  11/27/03 01:14 PM
• Crown Molding Angles Spreadsheet by Rusty Pancamo  1/2/04 06:25 PM
• Crown Molding Angles Spreadsheet by Rusty Pancamo  1/2/04 06:26 PM
• excel spreadsheet mitre by Buddy  1/17/04 04:14 PM
• Crown Molding Angles by dave  1/22/04 12:38 PM
• Mitre cuts for crown moulding by Tim  1/28/04 03:27 PM
• spreadsheet by Don K  2/15/04 08:52 PM
• mitre cut spread sheet by Stacy  2/23/04 08:43 PM
• Mitre cut spread sheet by Josh G  3/2/04 07:25 PM
• info cut crown mold by orlando l leon  3/20/04 05:06 PM
• Excel spreadsheet for accurate crown cuts by Phil  7/13/04 09:49 AM
• Excel Spreadsheet for mitre cutting of cornice by tech130245  3/11/05 12:51 AM
• excel compount mitre spreadsheet by mariefish  11/30/04 11:14 AM
• spreadsheet by jwalker73  1/16/05 11:41 PM
• Mitre Angles Excel Sheet by Dean  11/2/03 09:25 AM
• Excell Spreadsheet on miter cuts by Mike Funston  5/11/04 09:07 AM
• compound miter cuts spread sheet by K. Graeme  8/14/03 01:49 AM
• Mitre cut Excel spreadsheet wanted by Paul  8/30/03 07:35 AM
• crown moulding mitre cutting by joe graham  12/11/03 09:33 PM
• coumpound mitres by d lindahl  2/20/04 03:04 PM
• miter cuts by Simon Bedoya  2/23/04 01:34 AM
• mitre cutes by Otteyo@aol.com  11/25/04 08:34 PM
• excel spreadsheet mitre by paul  3/9/04 01:00 PM
• excel spread sheet for crown moulding by don  4/22/04 08:10 PM
• spreadsheet by Lyle Boehler  3/17/03 01:36 PM
• compount mitre cuts by joe waldhuber  4/8/03 04:32 PM
• compound miter cuts by C Waddell  5/23/03 06:17 AM
• compound miter cuts by Phil  6/1/03 02:54 PM
• Hope my Excel program helped you, Phil by Jay  8/1/03 09:28 AM
• Spread Sheet by Bruce Lucas  8/16/03 09:01 PM
• compound miter cuts by Frank  8/19/03 08:39 AM
• compound mitre cut spread sheet by jerry  8/23/03 12:30 PM
• Excel spread sheet for miter angles by Dan  1/19/04 11:12 AM
• Excel Spread Sheet by George  11/19/03 01:33 PM
• compount miter cut spreadsheet by Jason  4/12/04 06:16 PM
• compound miter cuts by Paul  3/17/04 02:42 PM
• Excel Spreadsheet by John  1/13/04 02:52 PM
• Miter Cuts by Jim Odem  1/25/04 07:16 AM
• Excel Spread Sheet by Jerry Parrish  1/26/04 11:34 AM
• excel sheet for crown moldings by Ronald Woodruff  10/1/02 06:27 PM
• miter cuts for crown molding by farah h. lowe-bey  10/15/02 02:42 PM
• Mitering for kitchen cabinet quarter round by Don Allen  12/10/02 07:45 PM
• Crown Molding by Norma  1/11/03 05:13 PM (: 1, : 0)
• cutting crown mold for ceilings inside and outside corners by mitchell conner  1/30/03 11:52 AM (: 1, : 0)
• cutting outside corners for crown molding by jeff  2/26/03 09:26 PM
• crown moldings spreadsheet by Richard  3/16/03 12:19 PM
• crown moldings/spreadsheet by MIKE LAFLAM  4/12/03 08:29 PM
• crown molding spreadsheet by jay strakal  4/13/03 10:50 AM
• Crown mold by Al Threlkeld  4/29/03 04:14 AM
• Awesome way to cut Crown Molding by CK  5/14/03 10:39 AM
• crown mold by kc  6/28/03 03:00 AM
• Angle figuring by TL  7/17/03 11:11 AM
• Thanks for the bum advise, TL by OP  8/2/03 09:59 AM
• You are mistaken by TL  8/11/03 03:26 PM
• Excel spreed sheet by Grayfoxx  5/14/04 10:39 AM
• Crown molding instalation by Sandra McDonald  3/8/04 09:49 PM
• Crown molding instalation by Sandra McDonald  3/8/04 09:59 PM
• Figuring angles the easy and cheap way by Jay  8/1/03 09:20 AM
• crown molding, compound miter cuts by Neil Dodgen  8/4/03 09:44 AM
• crown molding angles by Jim Brochu  1/29/04 02:26 PM
• I Need Help!!!!!! by Janica Jones  2/10/04 07:41 AM
• Cutting base boards by sarroyo33@yahoo.com  11/25/05 03:49 PM
• miter cuts by Cory  4/2/04 09:42 PM
• Here is a nice reply from a happy recipient: by Jay  8/6/03 02:43 PM
• angle spreadsheet by Dave Schweizer  8/11/03 12:37 PM
• Figureing angles posted by Jay Aug. 1, 03 by Tom Dabling  9/18/03 02:40 AM
• miter cuts by scott carruthers  11/28/03 12:27 PM
• 120 degrees outside miter cut by kelvin reese  2/6/04 06:57 PM
• Spreadsheet by Lucy Hickman  10/15/03 02:05 PM
• Spreadsheets for angle cuts by Stacey  5/22/04 10:27 PM
• Recipi of a happy home by Srikanta Chakraborty  12/13/03 01:11 AM
• easy way by steve sheppad  1/6/04 05:51 PM
• Excel-mitre program by Ra  8/11/03 01:49 PM
• I TRIED TO SEND YOU MY PROGRAM by Jay  8/23/03 02:14 PM
• Crown Molding by Bud Henderson  9/14/03 04:12 PM
• crown mold cutting by Jeff Mills  9/18/03 06:22 PM
• Excel Spreadsheet by Callie  1/2/04 10:17 AM
• Excel Miter Sreadsheet by billexecpc  1/25/05 02:27 PM
• crown molding by Dave Ziparo  1/19/04 03:36 PM
• cutting crown molding with miter box by Gene Striebel  8/23/03 11:22 PM
• cutting miters on crown molding by dean  2/19/04 07:10 AM
• crown molding by Peter Katawicz  2/21/04 09:38 PM
• cutting crown molding by Queen Tillman  9/13/03 06:23 AM
• Excel spreadsheet by Scott  3/14/04 07:06 PM
• Crown Molding by Jerry Ivey  10/6/03 08:18 AM
• Crown Molding by Frank  10/22/03 05:48 PM
• Moulding sheet by Al  4/5/04 12:16 PM
• spreadsheet for crown by daryl kitchen  3/5/04 09:48 AM
• HELP!! by Dave Schuster  4/1/03 09:00 PM
• Outside corners for crown molding by Glenn Roberts  4/26/03 02:06 PM
• MITER CUTS by ted lucuk  4/26/03 10:19 PM
• FREE INFORMATION, CROWN MOULDING CUTTING by Jay  7/30/03 04:58 PM
• FREE INFORMATION by Jay  7/30/03 05:55 PM
• Crown Moulding Mitre Corner cuts by Mike Leys  9/26/03 09:53 AM
• CROWN MLD CUTS INSIDE AND OUTSIDE by SCOTT POE  2/13/04 03:03 PM
• Crown Moulding by Doug Platt  2/17/04 06:18 PM
• crown molding by paul reynolds  3/14/04 06:57 PM
• spreadsheet by Jeff Carapella  10/30/03 06:36 AM
• crown moulding cutting by calvin  12/1/03 06:44 PM
• Mitre Cuts--Crown Moulding by Mike Grudis  1/3/04 01:13 PM
• cutting crown moulding by doug brackett  2/23/04 06:28 PM
• corner cabinets crown mould mitre cuts by Calvin  12/1/03 06:31 PM
• Please send your free info, spread sheet by Ron  1/10/04 12:08 AM
• Calculations by Vernon A. Marks  1/12/04 04:57 PM
• Crown Moulding Spreadsheet by Mike Swanick  2/5/04 02:00 PM
• cutting crown on a compound milter 12 inch saw by george englemark  5/16/04 12:24 PM
• cutting crown moulding by Shirley Holloway  1/27/04 10:13 PM
• Crown moulding spreadsheet by Michael Divita  2/7/04 10:23 AM
• Cutting crown rope mouldings by Willie L. Burton  2/26/04 02:39 PM
• cutting rope moulding by John Miller  5/3/04 02:33 AM
• Cutting crown rope mouldings - by Robert B. O'Kane  3/30/04 09:12 PM
• free information by ray bucher  2/8/04 11:17 AM
• cutting crown moulding by Les Toler  2/8/04 02:56 PM
• free information by Tim Peak  2/15/04 10:14 AM
• excel spreadsheet for cutting crown moulding by Traci Brown  2/16/04 10:28 AM
• Cutting Crown Moulding by MIchael Swift  2/16/04 11:09 PM
• Cutting rope crown moulding by Willie L. Burton  2/26/04 02:31 PM
• rope molding by norman  2/26/04 03:02 PM
• speardsheet by Allen Clark  2/26/04 05:09 PM
• Excel spreadsheet by Todd  3/1/04 08:17 AM
• Excel Spreadsheet by Kurt Schmitz  3/15/04 10:28 AM
• Free Information by Michelle Abbe  3/20/04 08:41 PM
• FREE INFORMATION, CROWN MOULDING CUTTING by Joey and Cynthia Rinella  3/23/04 09:54 AM
• Crown Mould Spreadsheet by Shadow Souther  3/30/04 07:49 PM
• cutting crown with unusual returns by ted lucuk  4/19/04 05:49 PM
• CUTTING CROWN MOULDING by MIKE FITZGERALD  5/13/04 09:51 PM
• Crown moulding excel spreadsheet by David J  5/22/04 01:57 PM
• Cown Moulding Spreadsheet by cindy vu  6/27/04 03:03 PM
• FREE INFORMATION, CROWN MOULDING CUTTING by Leon Floyd  7/4/04 12:49 AM
• FREE INFORMATION, CROWN MOULDING CUTTING by RICHARD FRIESS  7/8/04 03:45 PM
• miter cuts by jesusr  10/16/04 11:22 PM
• download spreadsheet from this site by carl21l  10/17/04 12:03 AM
• Excel spreadsheet by sahocken  1/30/05 07:40 PM
• spreadsheet by Dave Schweizer  8/11/03 12:38 PM
• speadsheet by Keith  10/6/03 05:12 PM
• Outside Corner cuts on crown molding by CK  5/14/03 10:49 AM
• Reply to CK by LC  8/1/03 09:37 AM
• Crown Molding Jig by CK  8/1/03 02:13 PM
• Compound Miter Jig from Rockler by CK  8/1/03 02:16 PM
• MY FINAL REPLY TO CK AND TL by Jay  8/1/03 06:08 PM
• HELP!! by Dave Schuster  4/1/03 09:01 PM
• Crown Molding cuts by Sam Clark  5/8/03 07:05 AM
• cutting corners fro crown molding with miter saw by Frank Rao  10/4/03 12:08 PM
• angles to cut crown molding flat on a miter saw by dennis j. makielski  2/1/04 01:58 PM
• Do it yourself crown molding video by Scott  4/9/04 06:45 PM
• molding by s schaefer  7/8/03 12:13 PM
• compound mitre cuts by Tom Matthews  11/6/02 08:35 AM
• Excel Spreadsheet for Crown Molding Cuts by Doug Deery  12/11/02 11:03 PM
• CROWN MOLDING VAULTED CEILINGS by Mario Balatti  12/17/02 12:41 PM
• excel spreadsheet for crown molding cuts by Darrel McGregor  1/29/03 01:34 PM
• excel spread sheet by barbara dow  3/7/03 01:01 PM
• Excel Spreadsheets for cutting crown moldings by Richard Bartlett  3/16/03 12:15 PM
• Excel spreadsheet by Jenny Powell  3/31/03 12:02 PM
• Excel Program by Walter Brumbalow  4/1/03 04:12 PM
• crown molding cuts by Larry H. Dixon  5/31/03 01:14 PM
• Excel Crown Molding Spreadsheet by Michael Anderson  7/24/03 09:47 PM
• I need help with cutting crown molding for vaulted ceilings! by Brian Parsons  8/26/03 08:21 PM
• Excel spreadsheeet for cutting crown molding by Bradley Sullivan  2/23/04 10:29 PM
• Ceiling mitre cuts by Eric Stillwell  3/16/03 07:30 PM
• crown moulding cuts by Heather Stock  6/7/03 06:23 PM
• Crown moulding cuts by Roberta  11/8/03 01:56 PM
• I need the spreadsheet as well. by John T  1/4/03 08:30 PM
• Excel speedsheet for cutting crown molding by jeff wilson  2/22/03 05:16 PM
• crown molding cuts by Greg Morton  3/30/03 06:40 PM
• enlighten me more about excel spreedsheet by eric  6/15/03 12:07 PM
• EXCEK SPEEDSHEET by VIVIAN L. MCKENZIE  2/3/04 12:06 PM
• miter cuts and crown molding by William Ramos  7/2/03 10:36 PM
• excel spreadsheet by david annakin  7/15/03 05:53 AM
• Excel Spreadsheet by Jamie  3/28/04 09:33 PM
• Download spreadsheet here: by doug  3/28/04 10:17 PM
• Crown Molding and Vaulted Ceilings by Dave Madden  3/20/04 01:58 PM
• Spreadsheet by David Ellison  1/7/03 12:41 PM
• spreadsheet by gary pinkelman  4/7/03 03:10 PM
• excel spreadsheet for cutting crown molding by Tim Jones  4/16/03 10:28 AM
• cutting inside & outside crown molding by earl stevens  6/7/03 04:39 PM
• cutting crown molding by gilbert daley  1/17/04 11:35 AM
• cutting crown molding by sylvia  2/2/04 11:47 AM
• Crown molding, cutting and installing by Jay  4/6/04 09:48 PM
• Crown Molding Excel Spreadsheet by KenB  7/18/05 01:01 AM
• crown molding cutting and installation by Jay  4/6/04 09:53 PM
• crown molding cutting and installation by Jay  4/6/04 09:53 PM
• cutting crown molding by kevin  3/31/04 10:30 PM
• compound miter saw settings on excel spread sheet by Jay Martin  4/26/03 10:34 PM
• excel spreadsheet by Kurt Bogott  4/30/03 08:46 AM
• Copy of Spreadsheet by Richard Cole  11/23/03 10:25 AM
• Need Compound Mitre Spreadsheet for odd angles by Rick Pechter  11/30/03 07:36 PM
• excel sheet on miter cuts by Chuck Starr  11/16/02 01:04 PM
• cutting inside & outside crown moulding by Harry Schweitzer  11/18/02 10:15 AM
• miter crown molding by gary beasley  11/20/02 01:03 PM
• miter crown molding by isaiah  11/28/02 10:39 AM
• cutting crown molding by Michelle Bare  12/17/03 11:05 PM
• how to miter corners by sylvia  2/2/04 11:52 AM
• CUTTING INSIDE CORNER CROWN MOLDING by LARRY REDFORD  5/23/03 06:51 AM
• cutting crown moulding on miter saw by Sledge Fyfe  7/18/03 12:45 AM
• Cutting crown molding by Cindy Sweeney  8/19/03 09:58 AM
• crown molding, base, and trim installation by shea  4/1/04 03:13 PM
• need help please by Joe Wood  1/11/04 05:02 PM
• mitering crown molding by Jane Sexton  5/16/04 09:48 AM
• Cutting Crown Molding by hockeycoach@sbcglobal.net  7/31/05 03:17 PM
• crown molding by bob andrews  12/9/02 07:01 PM
• Spreadsheet calculator web page crown mitre by Stefan  3/10/03 11:37 PM
• URL for Spreadsheet calculator web page crown mitre by Stefan  3/10/03 11:40 PM
• miter cut for crown mouldings by jack fudadin  11/16/02 09:48 PM
• setting angle for cutting crown molding by Carolyn Combs  5/30/03 08:22 AM
• How to cut and bevel crown moldings by George Nemeh  7/6/03 10:26 AM
• EASY way to Cut crown molding by TL  7/17/03 11:13 AM
• cutting crown molding by RC  9/11/03 11:09 AM
• re: crown moulding by Steve Ribbing  9/26/03 11:27 AM
• tools by Luly  11/10/03 08:48 AM
• crown molding by bob andrews  12/9/02 07:04 PM
• MITER CUTS FOR CROWN MOLDING by MIKE ROGERS  12/11/02 06:15 PM
• cutting crown molding by Danny Letutour  5/8/03 09:11 AM
• cutting crown molding by humpfrees4@adelphia.net  8/23/05 07:38 PM
• Miter Cuts for Crown Molding by Duane Dawson  7/15/03 02:17 PM
• Can I get a copy of the excel spreadsheet? by Kelly Lojka  11/16/03 01:25 PM
• Mitre cuts for crown molding/excel spred sheets by Mike McMillan  1/10/04 12:16 PM
• compound mitre angle spreadsheet by C Washington  12/13/02 09:30 AM
• cutting angle by Eric Jolivet  2/2/03 02:15 PM
• angle spreadsheet by miguel  4/19/03 08:00 AM
• Compound Mitre Angle Spreadsheet by Bill Warlum  5/24/04 12:47 PM
• Miter Excel Sheet by Juan  12/19/02 11:20 AM
• Compound Mitre Cut by Bob  2/8/03 08:51 PM
• miter excel sheet by Dan Bach  2/21/03 05:05 AM
• Excel compond mitter cut by Raouf Bishay  2/18/04 06:38 AM
• Excel Sheet on Crown Molding Cuts by David Keeney  12/27/02 07:35 PM
• miter excel spreed sheet for crown molding by Larry Crowder  12/29/02 01:32 PM
• Crown angles for inside 135 degrees 45/45 by Brent Gibson  12/31/02 10:40 AM
• English by Serj Yankian  12/8/03 02:08 AM
• excel miter worksheet by Dave Oliver  1/4/03 05:36 PM
• Compound miter cuts by Steve Johnson  1/4/03 08:03 PM
• Excel worksheet for Crown Molding by Gus Valdes  1/13/03 01:48 AM
• Compound Miter Spreadsheet by John Dumelle  2/2/03 04:03 PM
• Compound Miter Spreadsheet by Don Owen  7/21/03 06:03 PM
• Did my program help? by Jay  8/1/03 11:01 PM
• Compound Miter spreadsheet by Dee Kopecky  9/17/03 04:19 PM
• Compound Miters Spreadsheet doesn't exist? by Mike  5/19/04 11:36 PM
• Miters by doug  5/20/04 08:22 AM
• mitre cuts by craig askew  1/30/03 08:49 AM
• compound mitre angle formula by Danielle McBurney  2/3/03 07:31 PM
• compound mitre angle formula by Jim Shobe  6/10/03 07:12 AM
• Jim, did the compound angle drawings help? by Jay  8/1/03 11:37 PM
• Excel worksheet please by Dwayne  2/18/03 04:13 PM
• Excel spreadsheet-compound miter cuts by jim barnes  2/23/03 10:39 AM
• Excel Worksheet for Compound Miter Cuts by Jen Reese  2/24/03 06:11 PM
• spreadsheet by Stan Faure  3/14/03 05:33 PM
• Compound Miter Cuts by Scott Smith  3/1/03 04:13 PM
• Compound mitre cuts by Frank Black  4/15/03 07:01 PM
• Excel worksheet please by John Roberts  3/5/03 06:34 PM
• excel spreadsheet needed by Michelle  3/6/03 03:56 PM
• Excel Spreadsheet by Kevin  3/8/03 04:09 PM
• excel sheet by Amy Knecht  3/10/03 06:54 PM
• Excel Spreadsheet by Doug Warwick  3/15/03 10:07 PM
• Moulding by Michelle  3/28/03 01:55 PM
• Ceiling molding with a mitre box by Andy Sromek  4/2/03 01:35 PM
• Excel Spreadsheet by Jimmy  3/30/03 07:39 AM
• Excel Spreadsheet by Shawn A. Helfer  4/1/03 01:57 PM
• mitre cut spreadsheet by Jerry Keefe  4/3/03 11:43 AM
• compound angle spread sheet by Tim Larski  4/12/03 09:57 AM
• Excel Spreadsheet by miguel  4/18/03 04:34 PM
• Excel Spreadsheet by Marty Martone  2/29/04 11:10 AM
• Excel Spreadsheet by Susan Fortune  6/22/04 09:23 PM
• mitre saw cuts - excel spreadsheet by Ginny  7/12/04 07:13 PM
• Calculating compound mitre angles by Tim  4/27/03 09:55 PM
• Excel Spreadsheet by Jim Rivera  4/28/03 10:03 PM
• Spread Sheet by Roger W. Friedt, Jr.  6/2/03 02:55 PM
• Excel Spreadsheet by Brad Barbato  6/9/03 11:42 PM
• BRAD, DID MY PROGRAM HELP? by Jay  8/1/03 11:19 PM
• Calculating Mitre angles by fred  6/12/03 11:25 PM (: 1, : 1)
• i need a copy of the spreadsheet for cutting crown molding by Lenn Knese  6/24/03 10:21 AM
• NO NEED FOR SPREAD SHEETS by CK  7/1/03 12:00 PM
• Don't waste your money on gadgets by Jay  7/30/03 05:35 PM
• Compound Mitre Spreadsheet by Dan Becks  10/21/03 09:15 AM
• mitre cuts by Warren Greenwell  12/21/03 08:04 AM
• Please send me a copy of the spreadsheet. Thanks by Jon  12/29/03 11:14 AM
• spreadsheet for mitre cuts by Steve Lewis  5/1/04 02:17 PM
• Mitre Cut Spreadsheet by Jim Cox  5/25/04 06:51 PM
• Excel Program by Trevor Miller  5/12/04 08:13 PM
• Compound mitre spreadsheet by Barb Nippert  8/31/04 10:59 PM
• Excel SPreadsheet for Compund Mitre Saw - Crown Moulding Measurements by lindyloo  12/18/04 10:14 PM
• Excel spread sheet by jquatsoe  1/8/05 05:28 PM
• chair rail miter cuts by jordanfam10299@yahoo.com  2/15/09 02:12 PM (: 1, : 0)