RAS wiring

Post Reply | Watch this Post

Moderator Post (s) for this thread: > RAS Manual by doug seibert on 11/01/2007

Thanks, but the schematic from the manual and the plate on the motor do not say the same thing.

motor plate says:

230 VOLTS CONNECTION
--------------------
WHITE AND BLACK TO WHITE CORD LEAD
GREEN AND BLUE TO RED
BROWN LEFT UNCONNECTED AND INSULATED

115 VOLT CONNECTION
-------------------
WHITE,RED AND BLACK TO WHITE CORD LEAD
GREEN AND BLUE TO BROWN

according to the manual wiring diagram:

MOTOR PROTECTOR
---------------
terminal #1-black from cord lead
terminal #2-brown wire
terminal #3-blue lead to relay #4

RELAY
-----
terminal #2-black to capicitor
terminal #3-blue from motor
terminal #4-blue from motor protector

CAPACITOR
---------
terminal #1-black from relay
terminal #2-black to motor

My question is what do I hook the white cord lead to...and the red, yellow, and green wire from the motor go where?
There is no white wire from the motor.