 |
closed loop hot water heating system
Posted by DeanMS6 on January 16th, 2008 01:59 PM
I am currently remodeling our basement in a 1950 brick bungalow with a closed loop baseboard heating system. The problem is: there are six valves (three pairs)that extend down through the new ceiling and are connected to nothing, or at one time were connected to heaters in the basement. Do I have to completely drain the system and remove the valves and refill, or is there another way or trick or option I can use? Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
