 |
not a dumb question at all,,,
Posted by itsreallyconcrete  on November 19th, 2008 08:03 AM
In reply to Re-routing washing machine water out of sump by natalieA on November 18th, 2008 11:15 AM [Go to top of thread]
used to do this work - WORRY when either pump doesn't activate,,, i'm betting you don't have a lint trap on the washer,,, remove the sump top & clean it - if you've a float pump switch (ping-pong ball in a bubble), that may've gone bad,,, we used zoeller pumps w/mechanical switches,,, just because its 'radon' doesn't add to the system's complexity - it just means the sump top's caulked-in-place so do that when you replace it.
btw, get a lint trap - we used old panty hose & discharged into a stone sink,,, if the float sticks during washer discharge, it sure as **** will stick during heavy rain - its not difficult work - good luck !
next time, ask a more difficult question so thiggy can help :-)
Yes Its Concrete
decorative conc artisans
stain-emboss-sculpt-engrave
concrete repairs
Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
