View ChannelsFeatured: HVAC
View ShowroomsFeatured: Renovation Experts - Home Renovations

BobVila.com

Home

Viewed igniter whle running, nothing happens

Posted by Jimfixit on December 3rd, 2008 07:10 AM
In reply to Model Number?? by DanO on December 3rd, 2008 01:18 AM [Go to top of thread]

1 of 1 people found this post helpful

Post Reply |

Watch this Post

Moderator Post (s) for this thread:
> Model Number?? by DanO on 12/03/2008
> Not glowing by DanO on 12/03/2008
> Thermal fuse by DanO on 12/03/2008

I didn't realize I could view the igniter by removing that plug. Thanks for the tip lg. I ran it again and watched and it is doing absolutely nothing.
Your thoughts?

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Kenmore 70 series gas dryer runs, no heat, advice needed badly by jimfixit 12/2/08 11:26 PM
Model Number?? by DanO 12/3/08 01:18 AM (: 1, : 0)

Topic Follow-ups:

my thoughts by lg 12/3/08 07:14 AM (: 1, : 0)
Just replaced it, but will check it by Jimfixit 12/3/08 07:52 AM
fuse by lg 12/3/08 04:09 PM (: 1, : 0)
and just for the heck of it: by lg 12/3/08 04:12 PM (: 1, : 0)
just tried Perm Press...no go by Jimfixit 12/3/08 09:17 PM
this is the part I replaced by Jimfixit 12/3/08 09:08 PM
wierd by lg 12/4/08 06:17 AM (: 1, : 0)
Not glowing by DanO 12/3/08 05:46 PM (: 1, : 0)
Ok, I'll check it... by Jimfixit 12/3/08 09:23 PM
Thermal fuse by DanO 12/3/08 10:52 PM (: 2, : 0)