Not glowing

1 of 1 people found this post helpful

Post Reply | Watch this Post

Moderator Post (s) for this thread: > Model Number?? by DanO on 12/03/2008 > Thermal fuse by DanO on 12/03/2008

** I ran it again and watched and [the ignitor] is doing absolutely nothing. Your thoughts? **

A next step would usually be to see if the burner assembly was getting power when it should be heating.

NO power to burner = problem in dryer components (thermostats, safeties, timer, motor switch, etc.).

Power to burner but NO glow = problem in burner asm. component(s).

JMO

Dan O.
www.Appliance411.com/parts/?ref411=Kenmore+Dryer
The Appliance Information Site
=D~~~~~~