 |
tuchemsum
Posted by sirWILLIAM on November 7th, 2009 09:47 PM
0 of 1 people found this post helpful
ahrite,i received a 5hp snow thrower,it allways started until nnear the end,i notice a black ruber hose melt at the tip so i ppacked it in for a few trs,i allways pulled once with the ch alll the way to the rite?move it to the middle,pull it & it cracked,sometimes ya might have to hot start it but it ran,& throughn some lucky blizzards it worked hard,[allway replaceing pins}well soi changed the oil,fill ed it with fresh gas,& did dump the old but not until trying a few times.well fresh gas,oil,& i pouredd a few cap fulss of gas in the cylinder,[pulled the plug],IT cranked LIKE the good ole days,BUT DIED SECONDS LATTER,OWE & TTHE HARD WARE GUY SAID THIS WAS A BRAND NEW PLUG....HELP IF YA CAN MAKE SOME SENCE OUT OF MYPROBLEMS. Oh & sorry bout the caps.... Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
