 |
This Is What You Do ...
Posted by Jay J -Moderator on January 1st, 2001 10:18 AM
In reply to what's a soap bubble test by Jeannette on January 1st, 2001 01:28 AM [Go to top of thread]
1 of 1 people found this post helpful
Hi Jeannette, WHen you're finished connecting everything, FIRST, mix yourself a small bowl or bucket of very soapy water (preferably using dish detergent.) Then, slowly turn the gas on. ANd with a sponge of soapy-soap, 'cover' the connection with soap. IF the gas is leaking, you'll see it through the soap. The gas will 'blow holes' through the soap. NEVER use a lit match to do the 'leaking gas test'. The more soap, the better. Well, don't over-do it. My best to ya and hope this helps. Jay J -Moderator
Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
