 |
moisture control...........
Posted by John 2000 on January 19th, 2001 05:47 PM
In reply to moisture control/mold by Michelle Rowe on January 19th, 2001 05:08 PM [Go to top of thread]
Hi", Michelle,
There are two things you can do,
1), you can get a company that does osmois, and they
will run a copper rods into the ground around your
house, and into the wall, this will stop the damp
from coming up into the house ( if its done correct)
2), Have a good look at the central heating, make sure
it is in good order, ( again have a company come in)
and control the M3 of each room to see if you have
the right size rad/boiler...both will cost an arm and a leg.
so see which is the best for you...John 2000
Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
