 |
clean tools
Posted by Drew on October 5th, 1997 06:24 PM
Found great way to restore your new and old rusty tools
that leaves a non slippery surface. Buy a rust remover
(3M company) insert into 3/8 drill, place tool in bench
vise, and begin to remove rust. Once rust is removed
apply a light coat of linseed oil onto cleaned surface.
Let tool sit over nite and next day its ready for
heavy duty use. A lot faster than steel wool, grinders
and sandpaper.
Was this post helpful? Yes: or No:
|
 |
Post Reply
Watch this Post
