BobVila.com

Home

use deck mate screws

Posted by Sean Maltais on July 29th, 2002 03:37 PM
In reply to You can by Moderator, Steve on July 29th, 2002 01:29 PM [Go to top of thread]

Post Reply |

Watch this Post

I would use Deck Mate screws. They a have colors that mach most comosit decking material and each and every box comes with a drill bit.

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Composit Decking by Kevin 7/28/02 07:59 PM (: 1, : 0)
You can by Moderator, Steve 7/29/02 01:29 PM

Topic Follow-ups:

If this is the screw that by Moderator, Steve 7/29/02 09:36 PM
deck-mate screws by joe collins 12/8/02 10:01 AM
DeckMate screws by doug seibert 12/9/02 05:04 AM
Deck Mate Screws by Joe Collins 12/10/02 11:01 AM
deckmate by ryan 12/10/02 03:54 PM
Deck mate screws by Joe Collins 12/11/02 01:09 AM
Deck Mate Screws by Mr. Lowes 2/14/03 08:53 AM
Deckmate screw specs by Jim Anderson 3/12/03 11:59 AM
Shear strength of deck mate screws by Dennis Chiovarie 3/26/03 06:27 PM
Small Deck Mate Screws by Charlie Gerber 5/21/03 06:19 AM
Deckmate coatings by Luke Warren 4/8/03 08:01 PM
DeckMate Coating by Mr. Lowes 4/28/03 02:19 PM
Deckmate screw specs by Kevin Gilfillan 5/16/03 09:24 AM (: 1, : 0)
Number of deck mate screws per lb on various sizes by Herman Nock 7/18/03 07:57 PM
Quantity/# of deckmate screws by Robert Cleveland 7/24/03 12:15 PM
# of screws by Jennifer and Paul 4/1/04 01:22 PM
# of Deck Mate screws by Joe Jalbert 6/17/04 04:08 AM
Major problem with Deck Mate Screws 2004 by Tony 7/12/04 02:47 PM (: 1, : 0)
Deck mate driver bits by karen 6/2/03 10:19 AM
Deck Mate Driver Bits by Ken Grubb 7/7/03 02:18 PM
DeckMate Driver Bits by Jesse 9/20/03 10:17 PM
Specific Nail by Ted Anderson 3/23/04 02:28 PM
Deck Mate Screws by wayne beck 7/9/03 07:09 PM
cost by hank 5/16/03 05:22 PM
Deck mate use-Shutters by Ed Coletta 6/30/03 11:36 AM
how do you get the warranty???????? by ken shawver 5/21/04 10:27 AM
Deck Mate Screws by Ed Stockton 6/1/03 04:46 PM
deck-mate screws by Kevin Gilfillan 2/24/03 08:51 AM
I used them.. by Steve S. 7/31/02 10:21 AM
Deck Mate screws by Rich Balfanz 11/21/02 10:29 AM
magazine by Iveth 12/14/02 01:56 PM
Deck mate driver bits by Charly J 12/16/02 11:46 PM
DeckMate screws by doug seibert 12/17/02 04:48 AM
Deck mate driver bits by Charly J 12/18/02 10:49 PM
Driver Bits by Mr Lowes 2/14/03 08:59 AM
Driver bits wrong size by Gary Lewis 2/25/03 06:16 PM
Deck Mate Phillips Square-Driv screws by Bill Vogley 10/9/03 09:13 AM
Phllips Square-Driv driver bits by Ben Marome 1/29/04 04:43 PM
Phllips Square-Driv driver bits by Ben Marome 1/29/04 04:45 PM
short shank by tom 2/11/08 07:57 PM
ProFit Premium screws by Paul Siebert 2/6/04 10:03 AM