Topic History:

• Crown Molding Miter Cuts by Kurt A. Blevins  1/5/98 11:57 AM (: 1, : 1)
• Cutting Crown Moldings - Compound Mitre Cuts by Dan Rudman  1/5/98 03:08 PM (: 1, : 5)
• compound mitre cut by ROGER  3/13/99 02:56 PM
• compound mitre cuts by Frank Vandecruys  8/3/00 04:50 PM (: 1, : 1)

Topic Follow-ups:

• Compound Mitre Cuts by Matt Daniels  11/10/02 03:41 PM
• mitre cuts by Bruce Burns  6/8/03 09:59 AM
• MITRE CUTS by RICHARD STARKE  12/31/03 09:49 AM
• Mitre cutting wood to replace outside trim by Cathy Fitzgerald  3/2/04 08:38 AM
• Compound mitre cuts by Robert A Siedentopf  1/20/03 02:45 PM
• compound miter cuts by Barbara Veltri  5/25/03 04:53 PM
• Compound Mitre cuts by Ben Marshall  8/8/03 08:16 AM
• compound miter cuts by Paul Gomez  11/15/03 06:09 PM
• compound miter cuts by Nick Constantin  11/23/03 01:47 PM
• Excel Spreadsheet by Mite R. Saw  2/25/03 10:39 PM
• Compound mitre cuts by John Stephan  3/15/03 09:11 PM (: 1, : 0)
• Compound Mitre cuts and exell spreadsheet by Martin  5/8/03 11:34 AM
• compound mitre cuts by Jeanne Lacey  6/6/03 10:33 AM
• Crown Molding Jig by CK  7/1/03 11:54 AM
• Forget about the Rockler jig! by Jay  7/30/03 04:35 PM
• Excel Spreadsheet for miter cuts by Thaddeus Lemelle  8/8/03 09:09 AM
• Miter spreadsheet by Jon McWhorter  8/27/03 12:45 AM
• ExcelSpreadsheet For Miter Cuts by Gary E. Bergfield  9/1/03 04:50 PM
• excel spreadsheet by JEFF  10/16/03 03:37 PM
• Spread Sheet for Miter Cuts by Frank  10/22/03 12:45 PM
• Excel Spreadsheet by Rusty Pancamo  1/2/04 06:04 PM
• spread sheet for mitre cuts by leo clark  1/4/04 08:44 AM
• excel spreadsheet by jason  2/21/04 11:12 PM
• otolaryngology patient files by betty campbell  4/14/04 07:31 AM
• excell spread sheet for mitre cuts by les mac donald lesmacd@stis.net  5/13/04 08:23 PM
• compound mitre cuts by Paul Quayle  6/30/04 10:52 AM
• Miter Cuts by Frank  10/22/03 12:46 PM
• Spread sheet for miter cuts at catherdral cieling by Mike Farmer  11/2/03 02:50 PM
• cuts at catherdral ceiling by danielle donnelly  2/14/04 10:58 PM
• excel spreadsheet for miter cuts by lance sweeten  2/11/04 07:25 PM
• Miter spreadsheet by Tyson Whitten  2/21/04 12:57 PM
• excel spreadsheet for miter cuts by David McKeever  4/14/04 10:43 AM
• Excel spreadsheet for compound mitre cuts by Carl Wampole  6/6/04 10:11 PM
• Compound Mitre Spreedsheet by Bob@Schmeling.com  4/14/04 05:06 PM
• Miter cuts by L.Durkan  3/23/04 02:43 AM
• Crown Moulding Jig- excell sheet by Joey Rinella  3/23/04 09:39 AM
• Well without your eddress.................. by doug  3/23/04 01:26 PM
• Send the excel spreadsheet please. by Mac Wilson  4/25/04 02:56 PM
• Crown Moulding Jig- excel sheet by Joey Rinella  3/23/04 09:42 AM
• Compound miter spreedsheet by dhatley4@comcast.net  4/21/04 12:35 PM
• Excel spreadsheet for cutting crown molding by Phil Stark  7/14/04 03:22 PM
• Send an e-mail request to: by Excel  7/14/04 03:33 PM
• Crown Moulding by yellow555  4/20/05 09:05 PM
• Excel Spreadsheet by Ray  8/9/03 05:33 PM
• Miter Cut HELP!!!!!! by Dean Livengood  8/10/03 09:16 PM
• kitchen cabinets crown molding trim by mary  9/14/03 08:04 AM
• mitre cuts by pat harwood  12/30/03 04:23 PM
• excel spreadsheat for cutting crown moulding by Lars Wright  2/2/04 12:26 PM
• excel spreadsheet by LANCE SWEETEN  2/11/04 07:20 PM
• need excel spreadsheet by Tim  6/28/04 04:53 PM
• Baseboard too wide for Miter Box... what do I do? by Pamela  2/24/04 06:42 PM
• molding-miter cuts HELP!!!!!! by Robbin  3/15/04 03:19 PM
• cabinet crown molding by Keith Peifer  2/14/04 11:29 AM
• Mitre Cuts for Crown Molding by Mike Hemmen  2/15/04 10:39 PM
• installing crown moulding by jim smith  4/14/04 03:54 PM
• cutting crown molding by munter@ncis.com  5/15/04 10:21 AM
• MITRE CUTS by JZLOCKIE@COMCAST.NET  5/12/04 11:07 AM
• excel spreadsheet.... by r jay  8/17/03 11:37 AM
• Excel Spreadsheet for Mitre Cuts by G. Mackay  12/15/03 09:59 AM
• compound mitre saw cutting angles for crown molding by BillyJoBob2  9/14/04 07:29 AM
• excel spreadsheets for mitre cuts by bmkupchik  3/27/04 09:46 PM
• spreadsheet at The Badger Pond: by doug  3/28/04 12:26 AM
• Crown molding by Tom Wittig  9/8/03 09:02 PM
• crown molding on rounded corners by jade del sol  10/8/03 08:48 AM (: 3, : 2)
• Excel Spreadsheet by Thomas  10/12/03 02:02 AM
• Exell Spread sheet by Mike  3/6/04 04:23 PM
• Excel Spreadsheet by Phil Carpenter  1/3/04 10:36 AM
• Excel Spreadsheet by C Scramuzza  1/4/04 07:26 AM
• Excel Spreadsheet by David Bradley  1/4/04 05:22 PM
• Excel Spreadsheet by Jim Alekna  1/5/04 02:06 PM
• Excel Spreadsheet by Mike  1/7/04 11:33 PM
• Excel spread sheet by gduke  1/22/04 06:30 PM
• crownmoulding by peter finnerty  3/7/04 05:43 PM
• Need Spreadsheet BAD ! by Regina Spiker  1/29/04 06:57 AM
• Forget the spreadsheet............ by dougseibert  1/29/04 01:51 PM
• Excel Spreadsheet by David  2/17/04 05:40 PM
• Excel Spreadsheet by Dan Whelahan  2/22/04 09:31 AM
• excell sheet for cutting compound miter cuts on crown molding by George R. Allen Sr.  3/7/04 10:40 PM
• excel spreadsheet by bryan buckler  3/8/04 07:18 AM
• excel spreadsheet by George  4/6/04 03:59 PM
• Excel Speedsheet by Pierre  4/12/04 11:28 AM
• excel spreadsheet by Scott  4/19/04 09:09 AM
• Post your eddress by mailman  4/19/04 09:43 AM
• spread sheet please by mac wilson  4/25/04 03:07 PM
• Miter spread sheet by Tom  5/20/04 03:48 PM
• excel spreadsheet for miter cuts by Daniel  5/30/04 11:30 AM
• Excel Spreadsheet by billexecpc  1/26/05 12:53 AM
• Compound Mitre cuts and exell spreadsheet by Michael Livingston  7/5/03 07:43 AM
• Check this out by TL  7/17/03 11:02 AM
• Reply to "check this out" by Jay  7/30/03 04:29 PM
• Thanks Jay............... by doug seibert  7/31/03 06:33 AM
• You are mistaken, it works great by TL  8/1/03 02:00 PM
• Excel sheet on compoound miter angles by chuck  8/14/03 11:07 AM
• excell sheet by Doug Pierce  8/24/03 12:04 PM
• excel spreadsheet for miter angles by Barb Wright  1/2/04 11:29 AM
• Excel Spread Sheet by Roger  1/24/04 08:05 PM
• Excel Spread Sheet by David  1/31/04 05:31 PM
• Crown Molding excel spreadsheet by Mark Artesani  6/23/04 05:14 PM
• Crown molding cut on a compound miter saw by Frank  10/22/03 05:59 PM
• Compound mitre cuts by Janel  11/22/03 11:55 PM
• Mitre Saw cuts for moldings by Regina  11/27/03 07:23 AM
• excel spreadsheet mitre sheets by Wayne  11/27/03 01:14 PM
• Crown Molding Angles Spreadsheet by Rusty Pancamo  1/2/04 06:25 PM
• Crown Molding Angles Spreadsheet by Rusty Pancamo  1/2/04 06:26 PM
• excel spreadsheet mitre by Buddy  1/17/04 04:14 PM
• Crown Molding Angles by dave  1/22/04 12:38 PM
• Mitre cuts for crown moulding by Tim  1/28/04 03:27 PM
• spreadsheet by Don K  2/15/04 08:52 PM
• mitre cut spread sheet by Stacy  2/23/04 08:43 PM
• Mitre cut spread sheet by Josh G  3/2/04 07:25 PM
• info cut crown mold by orlando l leon  3/20/04 05:06 PM
• Excel spreadsheet for accurate crown cuts by Phil  7/13/04 09:49 AM
• Excel Spreadsheet for mitre cutting of cornice by tech130245  3/11/05 12:51 AM
• excel compount mitre spreadsheet by mariefish  11/30/04 11:14 AM
• spreadsheet by jwalker73  1/16/05 11:41 PM
• Mitre Angles Excel Sheet by Dean  11/2/03 09:25 AM
• Excell Spreadsheet on miter cuts by Mike Funston  5/11/04 09:07 AM
• compound miter cuts spread sheet by K. Graeme  8/14/03 01:49 AM
• Mitre cut Excel spreadsheet wanted by Paul  8/30/03 07:35 AM
• crown moulding mitre cutting by joe graham  12/11/03 09:33 PM
• coumpound mitres by d lindahl  2/20/04 03:04 PM
• miter cuts by Simon Bedoya  2/23/04 01:34 AM
• mitre cutes by Otteyo@aol.com  11/25/04 08:34 PM
• excel spreadsheet mitre by paul  3/9/04 01:00 PM
• excel spread sheet for crown moulding by don  4/22/04 08:10 PM
• spreadsheet by Lyle Boehler  3/17/03 01:36 PM
• compount mitre cuts by joe waldhuber  4/8/03 04:32 PM
• compound miter cuts by C Waddell  5/23/03 06:17 AM
• compound miter cuts by Phil  6/1/03 02:54 PM
• Hope my Excel program helped you, Phil by Jay  8/1/03 09:28 AM
• Spread Sheet by Bruce Lucas  8/16/03 09:01 PM
• compound miter cuts by Frank  8/19/03 08:39 AM
• compound mitre cut spread sheet by jerry  8/23/03 12:30 PM
• Excel spread sheet for miter angles by Dan  1/19/04 11:12 AM
• Excel Spread Sheet by George  11/19/03 01:33 PM
• compount miter cut spreadsheet by Jason  4/12/04 06:16 PM
• compound miter cuts by Paul  3/17/04 02:42 PM
• Excel Spreadsheet by John  1/13/04 02:52 PM
• Miter Cuts by Jim Odem  1/25/04 07:16 AM
• Excel Spread Sheet by Jerry Parrish  1/26/04 11:34 AM