Read the post below
Posted by eaglered on September 13, 2002
I have used heavy braided nylon masonary string to remove mirrors installed in this fashion. Place the string behind the mirror and used work it back and forth to saw through the adhesive. This method will not damage the drywall or the silvering on the back of the mirror. This method only works if you have sufficient space on either side of the mirror to work and not if it is butted up agaist a side wall or a cabinet. I have also used this method to cut PVC pipes in tight spots where a saw can't reach.
I have never tried this but it sounds like a great idea!
Remember to wear safety goggles and a heavy shirt/jacket.
Hope This Can Help,
Good Luck!
Dodgeman
Post Reply
Watch this Post
