Masking tape

Posted by Moderator, Steve on December 29th, 2002 10:17 AM
In reply to thanks Doug another great tip by LJ in TX on December 29th, 2002 09:30 AM [Go to top of thread]

Post Reply |

Watch this Post

both sides of the actual cut line, then mark the line on the tape, then cut the tape with the jig saw with a metal cutting blade. Should work, run 220 sand paper over the cut and remove burs.

Steve

Was this post helpful? Yes: or No:

Post Reply

Topic History:

any tips on cutting prepainte/or primed pegboard by LJ in TX 12/29/02 12:52 AM (: 1, : 0)
The fine tooth blade should do by deecee 12/29/02 02:35 AM
thanks Deeceefor the feedback by LJ in TX 12/29/02 08:10 AM
Cutting with a circular saw........... by doug seibert 12/29/02 09:14 AM
thanks Doug another great tip by LJ in TX 12/29/02 09:30 AM

Topic Follow-ups:

thanks Steve another great tip by LJ in TX 12/29/02 11:13 AM
Probably Too Late But... by Dodgeman 12/29/02 04:13 PM
primed pegboard cuts worked out fine by LJ inTx 12/29/02 08:52 PM

BobVila.com

Masking tape