BobVila.com

Home

Using a framing square

Posted by Ray Snyder on January 4th, 2003 01:27 PM
In reply to Using a framing square to determine the angle of cut for valley rafters. by doug gillum on December 10th, 2001 05:29 PM [Go to top of thread]

Post Reply |

Watch this Post

I would like some information on how to use a framing square. I am planning on building a backyard shed in the spring and am trying to get everything ready for that project.. Thanks

Was this post helpful? Yes: or No:

Post Reply

Topic History:

rafters by dave whitener 6/14/99 12:52 PM
Rafter cuts by Steve K 6/14/99 09:37 PM
Using a framing square to determine the angle of cut for valley rafters. by doug gillum 12/10/01 05:29 PM

Topic Follow-ups:

framing square by David J. Brandon 11/5/03 03:55 PM
Framing a sun deck. by Donald Jones 1/27/04 01:19 PM
framing roofs by patrick kearney 7/6/04 06:37 PM
Framing square link by Doug 7/6/04 07:08 PM
Stair Stringers by Todd Butzlaff 7/19/04 10:43 AM