View ChannelsFeatured: HVAC
View ShowroomsFeatured: Intelligent Warmth - Today's Oilheat

BobVila.com

Home

Rockwell Delta Band Saw

Posted by Mart on January 13th, 2003 02:16 PM
In reply to Delta Rockwell Parts by Lynn Johnson on December 29th, 2002 10:34 PM [Go to top of thread]

1 of 3 people found this post helpful

Post Reply |

Watch this Post

I believe the bottom and top Band saw
drive wheel have a rubber band on the wheel:
In that the saw-blade is rolling over the rubber
rather than directly on the steel wheel.

Looking for that rubber for the top wheel:

mstenholtz@smwsystemsinc.com

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Delta/rockwell parts by Bill 1/21/01 11:03 PM (: 18, : 11)
Rockwell/Delta saw by Henry in MI 1/22/01 05:38 AM (: 7, : 2)
Delta can provide part numbers, too..... by BobF 1/22/01 01:17 PM (: 2, : 8)
sorry..here's the site by BobF 1/22/01 01:18 PM (: 9, : 1)
Rockwell Model 16RAS by EDDY BIRD 12/23/02 05:00 PM
Delta Rockwell Parts by Lynn Johnson 12/29/02 10:34 PM (: 6, : 2)

Topic Follow-ups:

tire for upper wheel of my 14 in rockwell bandsaw by phil 5/6/03 10:06 AM
Rockwell Delta band saw by egilbert 8/29/03 03:49 PM
Tire for Rockwell Band Saw by Mary Lee Adler 11/15/03 09:56 AM (: 2, : 0)
!6"Delta band saw by Ray Wendel 2/14/04 10:52 AM
guide block by Barbara 6/17/03 07:16 PM
Delta bench band saw 28-160 by Ron Weaver 7/9/03 09:53 AM
DELTA 28-160 Cannot get the blade to keep from wandering. by MurrayMan 3/7/05 11:27 AM (: 6, : 0)
ROCKWELL MODEL 28-3X5 by DUANE L CLEGG 7/11/03 11:10 AM
Rockwell Model 28-3X5 by Chris Miller 12/8/03 04:29 PM (: 1, : 0)
Rockwell 14" Band Saw Model # 28-300 by Carl Kacer 11/14/03 07:53 AM (: 1, : 0)
manuals, parts list by darlene 11/25/03 02:21 PM
delta bucksaw model 33-150 by leo 2/19/04 02:46 AM (: 1, : 0)
33-150 bucksaw by Steve 4/23/04 07:04 AM
sawbuck saw by ed aslanian 6/29/04 06:08 PM
Sawbuck 33-150 Parts list by repeters11 10/12/08 09:33 AM
Band Saw Model 28-300 Delta Rockwell by Doug 2/25/04 05:26 PM
28-300 parts by Albert Einstein 2/25/04 05:32 PM
Rockwell band saw Model #28-300 by Bob 5/13/04 02:45 PM
Parts list and schematics by doug 5/13/04 02:54 PM
20" Delta Band Saw by Dave Campbell 1/4/04 08:23 PM
Cool Blocks by Pat Rawlick 1/17/04 04:34 PM
Part for Rockwell Band Saw by Melvin Weaver 2/24/04 09:08 AM
Bandsaw tire for 28 200 by Albert Einstein 2/24/04 11:07 AM
Rockwell 28-200 by Hiro Protagonist 3/3/04 06:04 PM
Band Saw by Robert Heibel 4/5/04 12:42 PM
28-200 bandsaw by barry flynn 4/12/04 10:00 PM
Model 28-340 Rockwell Band Saw tire by donald.elliott@ncmail.net 5/17/04 01:21 PM
I too am looking for up & low wheel tires by bob mundy 5/23/04 12:23 AM