View ChannelsFeatured: Deck, Porch & Patio
View ShowroomsFeatured: PexSupply.com - PEX & Radiant Heat Su...

BobVila.com

Home

compound mitre cut

Posted by ROGER on March 13th, 1999 02:56 PM
In reply to Cutting Crown Moldings - Compound Mitre Cuts by Dan Rudman on January 5th, 1998 03:08 PM [Go to top of thread]

Post Reply |

Watch this Post

Moderator Post:
> Cutting Crown Molding by Handyman on 05/19/2005

I have a 10" compound mitre, delta saw.
I need to make a cut to fit inside corner cabinet.
My outside corners are fine. I'm wasting lots of hickory , please help..Does the following help?
The face of the inside cupboard is 22.5degree angle to the cabinets on either side.
thank you

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Crown Molding Miter Cuts by Kurt A. Blevins 1/5/98 11:57 AM (: 1, : 1)
Cutting Crown Moldings - Compound Mitre Cuts by Dan Rudman 1/5/98 03:08 PM (: 1, : 5)

Topic Follow-ups:

SHADOW BOX TRIM ON WALL by MICHAEL HUNT 2/14/00 10:48 AM (: 2, : 0)
compound miter cuts on large crown moldings by Concepts II Ltd. 2/23/00 06:55 PM
Mitre chart by France 7/2/03 07:59 PM
compound miter cuts spreadsheet by Michael Livingston 7/5/03 07:49 AM
Mire Cuts by John Aaron Avalos 2/21/04 02:45 PM
compound mitre cuts by Frank Vandecruys 8/3/00 04:50 PM (: 1, : 1)
compound miter cuts by rod beehner 9/17/02 09:07 AM
Compound Mitre Cuts by Matt Daniels 11/10/02 03:41 PM
mitre cuts by Bruce Burns 6/8/03 09:59 AM
MITRE CUTS by RICHARD STARKE 12/31/03 09:49 AM
Mitre cutting wood to replace outside trim by Cathy Fitzgerald 3/2/04 08:38 AM
Compound mitre cuts by Robert A Siedentopf 1/20/03 02:45 PM
compound miter cuts by Barbara Veltri 5/25/03 04:53 PM
Compound Mitre cuts by Ben Marshall 8/8/03 08:16 AM
compound miter cuts by Paul Gomez 11/15/03 06:09 PM
compound miter cuts by Nick Constantin 11/23/03 01:47 PM
Excel Spreadsheet by Mite R. Saw 2/25/03 10:39 PM
Compound mitre cuts by John Stephan 3/15/03 09:11 PM (: 1, : 0)
Compound Mitre cuts and exell spreadsheet by Martin 5/8/03 11:34 AM
compound mitre cuts by Jeanne Lacey 6/6/03 10:33 AM
Crown Molding Jig by CK 7/1/03 11:54 AM
Forget about the Rockler jig! by Jay 7/30/03 04:35 PM
Excel Spreadsheet for miter cuts by Thaddeus Lemelle 8/8/03 09:09 AM
Miter spreadsheet by Jon McWhorter 8/27/03 12:45 AM
ExcelSpreadsheet For Miter Cuts by Gary E. Bergfield 9/1/03 04:50 PM
excel spreadsheet by JEFF 10/16/03 03:37 PM
Spread Sheet for Miter Cuts by Frank 10/22/03 12:45 PM
Excel Spreadsheet by Rusty Pancamo 1/2/04 06:04 PM
spread sheet for mitre cuts by leo clark 1/4/04 08:44 AM
excel spreadsheet by jason 2/21/04 11:12 PM
otolaryngology patient files by betty campbell 4/14/04 07:31 AM
excell spread sheet for mitre cuts by les mac donald lesmacd@stis.net 5/13/04 08:23 PM
compound mitre cuts by Paul Quayle 6/30/04 10:52 AM
Miter Cuts by Frank 10/22/03 12:46 PM
Spread sheet for miter cuts at catherdral cieling by Mike Farmer 11/2/03 02:50 PM
cuts at catherdral ceiling by danielle donnelly 2/14/04 10:58 PM
excel spreadsheet for miter cuts by lance sweeten 2/11/04 07:25 PM
Miter spreadsheet by Tyson Whitten 2/21/04 12:57 PM
excel spreadsheet for miter cuts by David McKeever 4/14/04 10:43 AM
Excel spreadsheet for compound mitre cuts by Carl Wampole 6/6/04 10:11 PM
Compound Mitre Spreedsheet by Bob@Schmeling.com 4/14/04 05:06 PM
Miter cuts by L.Durkan 3/23/04 02:43 AM
Crown Moulding Jig- excell sheet by Joey Rinella 3/23/04 09:39 AM
Well without your eddress.................. by doug 3/23/04 01:26 PM
Send the excel spreadsheet please. by Mac Wilson 4/25/04 02:56 PM
Crown Moulding Jig- excel sheet by Joey Rinella 3/23/04 09:42 AM
Compound miter spreedsheet by dhatley4@comcast.net 4/21/04 12:35 PM
Excel spreadsheet for cutting crown molding by Phil Stark 7/14/04 03:22 PM
Send an e-mail request to: by Excel 7/14/04 03:33 PM
Crown Moulding by yellow555 4/20/05 09:05 PM
Excel Spreadsheet by Ray 8/9/03 05:33 PM
Miter Cut HELP!!!!!! by Dean Livengood 8/10/03 09:16 PM
kitchen cabinets crown molding trim by mary 9/14/03 08:04 AM
mitre cuts by pat harwood 12/30/03 04:23 PM
excel spreadsheat for cutting crown moulding by Lars Wright 2/2/04 12:26 PM
excel spreadsheet by LANCE SWEETEN 2/11/04 07:20 PM
need excel spreadsheet by Tim 6/28/04 04:53 PM
Baseboard too wide for Miter Box... what do I do? by Pamela 2/24/04 06:42 PM
molding-miter cuts HELP!!!!!! by Robbin 3/15/04 03:19 PM
cabinet crown molding by Keith Peifer 2/14/04 11:29 AM
Mitre Cuts for Crown Molding by Mike Hemmen 2/15/04 10:39 PM
installing crown moulding by jim smith 4/14/04 03:54 PM
cutting crown molding by munter@ncis.com 5/15/04 10:21 AM
MITRE CUTS by JZLOCKIE@COMCAST.NET 5/12/04 11:07 AM
excel spreadsheet.... by r jay 8/17/03 11:37 AM
Excel Spreadsheet for Mitre Cuts by G. Mackay 12/15/03 09:59 AM
compound mitre saw cutting angles for crown molding by BillyJoBob2 9/14/04 07:29 AM
excel spreadsheets for mitre cuts by bmkupchik 3/27/04 09:46 PM
spreadsheet at The Badger Pond: by doug 3/28/04 12:26 AM
Crown molding by Tom Wittig 9/8/03 09:02 PM
crown molding on rounded corners by jade del sol 10/8/03 08:48 AM (: 3, : 2)
Excel Spreadsheet by Thomas 10/12/03 02:02 AM
Exell Spread sheet by Mike 3/6/04 04:23 PM
Excel Spreadsheet by Phil Carpenter 1/3/04 10:36 AM
Excel Spreadsheet by C Scramuzza 1/4/04 07:26 AM
Excel Spreadsheet by David Bradley 1/4/04 05:22 PM
Excel Spreadsheet by Jim Alekna 1/5/04 02:06 PM
Excel Spreadsheet by Mike 1/7/04 11:33 PM
Excel spread sheet by gduke 1/22/04 06:30 PM
crownmoulding by peter finnerty 3/7/04 05:43 PM
Need Spreadsheet BAD ! by Regina Spiker 1/29/04 06:57 AM
Forget the spreadsheet............ by dougseibert 1/29/04 01:51 PM
Excel Spreadsheet by David 2/17/04 05:40 PM
Excel Spreadsheet by Dan Whelahan 2/22/04 09:31 AM
excell sheet for cutting compound miter cuts on crown molding by George R. Allen Sr. 3/7/04 10:40 PM
excel spreadsheet by bryan buckler 3/8/04 07:18 AM
excel spreadsheet by George 4/6/04 03:59 PM
Excel Speedsheet by Pierre 4/12/04 11:28 AM
excel spreadsheet by Scott 4/19/04 09:09 AM
Post your eddress by mailman 4/19/04 09:43 AM
spread sheet please by mac wilson 4/25/04 03:07 PM
Miter spread sheet by Tom 5/20/04 03:48 PM
excel spreadsheet for miter cuts by Daniel 5/30/04 11:30 AM
Excel Spreadsheet by billexecpc 1/26/05 12:53 AM
Compound Mitre cuts and exell spreadsheet by Michael Livingston 7/5/03 07:43 AM
Check this out by TL 7/17/03 11:02 AM
Reply to "check this out" by Jay 7/30/03 04:29 PM
Thanks Jay............... by doug seibert 7/31/03 06:33 AM
You are mistaken, it works great by TL 8/1/03 02:00 PM
Excel sheet on compoound miter angles by chuck 8/14/03 11:07 AM
excell sheet by Doug Pierce 8/24/03 12:04 PM
excel spreadsheet for miter angles by Barb Wright 1/2/04 11:29 AM
Excel Spread Sheet by Roger 1/24/04 08:05 PM
Excel Spread Sheet by David 1/31/04 05:31 PM
Crown Molding excel spreadsheet by Mark Artesani 6/23/04 05:14 PM
Crown molding cut on a compound miter saw by Frank 10/22/03 05:59 PM
Compound mitre cuts by Janel 11/22/03 11:55 PM
Mitre Saw cuts for moldings by Regina 11/27/03 07:23 AM
excel spreadsheet mitre sheets by Wayne 11/27/03 01:14 PM
Crown Molding Angles Spreadsheet by Rusty Pancamo 1/2/04 06:25 PM
Crown Molding Angles Spreadsheet by Rusty Pancamo 1/2/04 06:26 PM
excel spreadsheet mitre by Buddy 1/17/04 04:14 PM
Crown Molding Angles by dave 1/22/04 12:38 PM
Mitre cuts for crown moulding by Tim 1/28/04 03:27 PM
spreadsheet by Don K 2/15/04 08:52 PM
mitre cut spread sheet by Stacy 2/23/04 08:43 PM
Mitre cut spread sheet by Josh G 3/2/04 07:25 PM
info cut crown mold by orlando l leon 3/20/04 05:06 PM
Excel spreadsheet for accurate crown cuts by Phil 7/13/04 09:49 AM
Excel Spreadsheet for mitre cutting of cornice by tech130245 3/11/05 12:51 AM
excel compount mitre spreadsheet by mariefish 11/30/04 11:14 AM
spreadsheet by jwalker73 1/16/05 11:41 PM
Mitre Angles Excel Sheet by Dean 11/2/03 09:25 AM
Excell Spreadsheet on miter cuts by Mike Funston 5/11/04 09:07 AM
compound miter cuts spread sheet by K. Graeme 8/14/03 01:49 AM
Mitre cut Excel spreadsheet wanted by Paul 8/30/03 07:35 AM
crown moulding mitre cutting by joe graham 12/11/03 09:33 PM
coumpound mitres by d lindahl 2/20/04 03:04 PM
miter cuts by Simon Bedoya 2/23/04 01:34 AM
mitre cutes by Otteyo@aol.com 11/25/04 08:34 PM
excel spreadsheet mitre by paul 3/9/04 01:00 PM
excel spread sheet for crown moulding by don 4/22/04 08:10 PM
spreadsheet by Lyle Boehler 3/17/03 01:36 PM
compount mitre cuts by joe waldhuber 4/8/03 04:32 PM
compound miter cuts by C Waddell 5/23/03 06:17 AM
compound miter cuts by Phil 6/1/03 02:54 PM
Hope my Excel program helped you, Phil by Jay 8/1/03 09:28 AM
Spread Sheet by Bruce Lucas 8/16/03 09:01 PM
compound miter cuts by Frank 8/19/03 08:39 AM
compound mitre cut spread sheet by jerry 8/23/03 12:30 PM
Excel spread sheet for miter angles by Dan 1/19/04 11:12 AM
Excel Spread Sheet by George 11/19/03 01:33 PM
compount miter cut spreadsheet by Jason 4/12/04 06:16 PM
compound miter cuts by Paul 3/17/04 02:42 PM
Excel Spreadsheet by John 1/13/04 02:52 PM
Miter Cuts by Jim Odem 1/25/04 07:16 AM
Excel Spread Sheet by Jerry Parrish 1/26/04 11:34 AM
excel sheet for crown moldings by Ronald Woodruff 10/1/02 06:27 PM
miter cuts for crown molding by farah h. lowe-bey 10/15/02 02:42 PM
Mitering for kitchen cabinet quarter round by Don Allen 12/10/02 07:45 PM
Crown Molding by Norma 1/11/03 05:13 PM (: 1, : 0)
cutting crown mold for ceilings inside and outside corners by mitchell conner 1/30/03 11:52 AM (: 1, : 0)
cutting outside corners for crown molding by jeff 2/26/03 09:26 PM
crown moldings spreadsheet by Richard 3/16/03 12:19 PM
crown moldings/spreadsheet by MIKE LAFLAM 4/12/03 08:29 PM
crown molding spreadsheet by jay strakal 4/13/03 10:50 AM
Crown mold by Al Threlkeld 4/29/03 04:14 AM
Awesome way to cut Crown Molding by CK 5/14/03 10:39 AM
crown mold by kc 6/28/03 03:00 AM
Angle figuring by TL 7/17/03 11:11 AM
Thanks for the bum advise, TL by OP 8/2/03 09:59 AM
You are mistaken by TL 8/11/03 03:26 PM
Excel spreed sheet by Grayfoxx 5/14/04 10:39 AM
Crown molding instalation by Sandra McDonald 3/8/04 09:49 PM
Crown molding instalation by Sandra McDonald 3/8/04 09:59 PM
Figuring angles the easy and cheap way by Jay 8/1/03 09:20 AM
crown molding, compound miter cuts by Neil Dodgen 8/4/03 09:44 AM
crown molding angles by Jim Brochu 1/29/04 02:26 PM
I Need Help!!!!!! by Janica Jones 2/10/04 07:41 AM
Cutting base boards by sarroyo33@yahoo.com 11/25/05 03:49 PM
miter cuts by Cory 4/2/04 09:42 PM
Here is a nice reply from a happy recipient: by Jay 8/6/03 02:43 PM
angle spreadsheet by Dave Schweizer 8/11/03 12:37 PM
Figureing angles posted by Jay Aug. 1, 03 by Tom Dabling 9/18/03 02:40 AM
miter cuts by scott carruthers 11/28/03 12:27 PM
120 degrees outside miter cut by kelvin reese 2/6/04 06:57 PM
Spreadsheet by Lucy Hickman 10/15/03 02:05 PM
Spreadsheets for angle cuts by Stacey 5/22/04 10:27 PM
Recipi of a happy home by Srikanta Chakraborty 12/13/03 01:11 AM
easy way by steve sheppad 1/6/04 05:51 PM
Excel-mitre program by Ra 8/11/03 01:49 PM
I TRIED TO SEND YOU MY PROGRAM by Jay 8/23/03 02:14 PM
Crown Molding by Bud Henderson 9/14/03 04:12 PM
crown mold cutting by Jeff Mills 9/18/03 06:22 PM
Excel Spreadsheet by Callie 1/2/04 10:17 AM
Excel Miter Sreadsheet by billexecpc 1/25/05 02:27 PM
crown molding by Dave Ziparo 1/19/04 03:36 PM
cutting crown molding with miter box by Gene Striebel 8/23/03 11:22 PM
cutting miters on crown molding by dean 2/19/04 07:10 AM
crown molding by Peter Katawicz 2/21/04 09:38 PM
cutting crown molding by Queen Tillman 9/13/03 06:23 AM
Excel spreadsheet by Scott 3/14/04 07:06 PM
Crown Molding by Jerry Ivey 10/6/03 08:18 AM
Crown Molding by Frank 10/22/03 05:48 PM
Moulding sheet by Al 4/5/04 12:16 PM
spreadsheet for crown by daryl kitchen 3/5/04 09:48 AM
HELP!! by Dave Schuster 4/1/03 09:00 PM
Outside corners for crown molding by Glenn Roberts 4/26/03 02:06 PM
MITER CUTS by ted lucuk 4/26/03 10:19 PM
FREE INFORMATION, CROWN MOULDING CUTTING by Jay 7/30/03 04:58 PM
FREE INFORMATION by Jay 7/30/03 05:55 PM
Crown Moulding Mitre Corner cuts by Mike Leys 9/26/03 09:53 AM
CROWN MLD CUTS INSIDE AND OUTSIDE by SCOTT POE 2/13/04 03:03 PM
Crown Moulding by Doug Platt 2/17/04 06:18 PM
crown molding by paul reynolds 3/14/04 06:57 PM
spreadsheet by Jeff Carapella 10/30/03 06:36 AM
crown moulding cutting by calvin 12/1/03 06:44 PM
Mitre Cuts--Crown Moulding by Mike Grudis 1/3/04 01:13 PM
cutting crown moulding by doug brackett 2/23/04 06:28 PM
corner cabinets crown mould mitre cuts by Calvin 12/1/03 06:31 PM
Please send your free info, spread sheet by Ron 1/10/04 12:08 AM
Calculations by Vernon A. Marks 1/12/04 04:57 PM
Crown Moulding Spreadsheet by Mike Swanick 2/5/04 02:00 PM
cutting crown on a compound milter 12 inch saw by george englemark 5/16/04 12:24 PM
cutting crown moulding by Shirley Holloway 1/27/04 10:13 PM
Crown moulding spreadsheet by Michael Divita 2/7/04 10:23 AM
Cutting crown rope mouldings by Willie L. Burton 2/26/04 02:39 PM
cutting rope moulding by John Miller 5/3/04 02:33 AM
Cutting crown rope mouldings - by Robert B. O'Kane 3/30/04 09:12 PM
free information by ray bucher 2/8/04 11:17 AM
cutting crown moulding by Les Toler 2/8/04 02:56 PM
free information by Tim Peak 2/15/04 10:14 AM
excel spreadsheet for cutting crown moulding by Traci Brown 2/16/04 10:28 AM
Cutting Crown Moulding by MIchael Swift 2/16/04 11:09 PM
Cutting rope crown moulding by Willie L. Burton 2/26/04 02:31 PM
rope molding by norman 2/26/04 03:02 PM
speardsheet by Allen Clark 2/26/04 05:09 PM
Excel spreadsheet by Todd 3/1/04 08:17 AM
Excel Spreadsheet by Kurt Schmitz 3/15/04 10:28 AM
Free Information by Michelle Abbe 3/20/04 08:41 PM
FREE INFORMATION, CROWN MOULDING CUTTING by Joey and Cynthia Rinella 3/23/04 09:54 AM
Crown Mould Spreadsheet by Shadow Souther 3/30/04 07:49 PM
cutting crown with unusual returns by ted lucuk 4/19/04 05:49 PM
CUTTING CROWN MOULDING by MIKE FITZGERALD 5/13/04 09:51 PM
Crown moulding excel spreadsheet by David J 5/22/04 01:57 PM
Cown Moulding Spreadsheet by cindy vu 6/27/04 03:03 PM
FREE INFORMATION, CROWN MOULDING CUTTING by Leon Floyd 7/4/04 12:49 AM
FREE INFORMATION, CROWN MOULDING CUTTING by RICHARD FRIESS 7/8/04 03:45 PM
miter cuts by jesusr 10/16/04 11:22 PM
download spreadsheet from this site by carl21l 10/17/04 12:03 AM
Excel spreadsheet by sahocken 1/30/05 07:40 PM
spreadsheet by Dave Schweizer 8/11/03 12:38 PM
speadsheet by Keith 10/6/03 05:12 PM
Outside Corner cuts on crown molding by CK 5/14/03 10:49 AM
Reply to CK by LC 8/1/03 09:37 AM
Crown Molding Jig by CK 8/1/03 02:13 PM
Compound Miter Jig from Rockler by CK 8/1/03 02:16 PM
MY FINAL REPLY TO CK AND TL by Jay 8/1/03 06:08 PM
HELP!! by Dave Schuster 4/1/03 09:01 PM
Crown Molding cuts by Sam Clark 5/8/03 07:05 AM
cutting corners fro crown molding with miter saw by Frank Rao 10/4/03 12:08 PM
angles to cut crown molding flat on a miter saw by dennis j. makielski 2/1/04 01:58 PM
Do it yourself crown molding video by Scott 4/9/04 06:45 PM
molding by s schaefer 7/8/03 12:13 PM
compound mitre cuts by Tom Matthews 11/6/02 08:35 AM
Excel Spreadsheet for Crown Molding Cuts by Doug Deery 12/11/02 11:03 PM
CROWN MOLDING VAULTED CEILINGS by Mario Balatti 12/17/02 12:41 PM
excel spreadsheet for crown molding cuts by Darrel McGregor 1/29/03 01:34 PM
excel spread sheet by barbara dow 3/7/03 01:01 PM
Excel Spreadsheets for cutting crown moldings by Richard Bartlett 3/16/03 12:15 PM
Excel spreadsheet by Jenny Powell 3/31/03 12:02 PM
Excel Program by Walter Brumbalow 4/1/03 04:12 PM
crown molding cuts by Larry H. Dixon 5/31/03 01:14 PM
Excel Crown Molding Spreadsheet by Michael Anderson 7/24/03 09:47 PM
I need help with cutting crown molding for vaulted ceilings! by Brian Parsons 8/26/03 08:21 PM
Excel spreadsheeet for cutting crown molding by Bradley Sullivan 2/23/04 10:29 PM
Ceiling mitre cuts by Eric Stillwell 3/16/03 07:30 PM
crown moulding cuts by Heather Stock 6/7/03 06:23 PM
Crown moulding cuts by Roberta 11/8/03 01:56 PM
I need the spreadsheet as well. by John T 1/4/03 08:30 PM
Excel speedsheet for cutting crown molding by jeff wilson 2/22/03 05:16 PM
crown molding cuts by Greg Morton 3/30/03 06:40 PM
enlighten me more about excel spreedsheet by eric 6/15/03 12:07 PM
EXCEK SPEEDSHEET by VIVIAN L. MCKENZIE 2/3/04 12:06 PM
miter cuts and crown molding by William Ramos 7/2/03 10:36 PM
excel spreadsheet by david annakin 7/15/03 05:53 AM
Excel Spreadsheet by Jamie 3/28/04 09:33 PM
Download spreadsheet here: by doug 3/28/04 10:17 PM
Crown Molding and Vaulted Ceilings by Dave Madden 3/20/04 01:58 PM
Spreadsheet by David Ellison 1/7/03 12:41 PM
spreadsheet by gary pinkelman 4/7/03 03:10 PM
excel spreadsheet for cutting crown molding by Tim Jones 4/16/03 10:28 AM
cutting inside & outside crown molding by earl stevens 6/7/03 04:39 PM
cutting crown molding by gilbert daley 1/17/04 11:35 AM
cutting crown molding by sylvia 2/2/04 11:47 AM
Crown molding, cutting and installing by Jay 4/6/04 09:48 PM
Crown Molding Excel Spreadsheet by KenB 7/18/05 01:01 AM
crown molding cutting and installation by Jay 4/6/04 09:53 PM
crown molding cutting and installation by Jay 4/6/04 09:53 PM
cutting crown molding by kevin 3/31/04 10:30 PM
compound miter saw settings on excel spread sheet by Jay Martin 4/26/03 10:34 PM
excel spreadsheet by Kurt Bogott 4/30/03 08:46 AM
Copy of Spreadsheet by Richard Cole 11/23/03 10:25 AM
Need Compound Mitre Spreadsheet for odd angles by Rick Pechter 11/30/03 07:36 PM
excel sheet on miter cuts by Chuck Starr 11/16/02 01:04 PM
cutting inside & outside crown moulding by Harry Schweitzer 11/18/02 10:15 AM
miter crown molding by gary beasley 11/20/02 01:03 PM
miter crown molding by isaiah 11/28/02 10:39 AM
cutting crown molding by Michelle Bare 12/17/03 11:05 PM
how to miter corners by sylvia 2/2/04 11:52 AM
CUTTING INSIDE CORNER CROWN MOLDING by LARRY REDFORD 5/23/03 06:51 AM
cutting crown moulding on miter saw by Sledge Fyfe 7/18/03 12:45 AM
Cutting crown molding by Cindy Sweeney 8/19/03 09:58 AM
crown molding, base, and trim installation by shea 4/1/04 03:13 PM
need help please by Joe Wood 1/11/04 05:02 PM
mitering crown molding by Jane Sexton 5/16/04 09:48 AM
Cutting Crown Molding by hockeycoach@sbcglobal.net 7/31/05 03:17 PM
crown molding by bob andrews 12/9/02 07:01 PM
Spreadsheet calculator web page crown mitre by Stefan 3/10/03 11:37 PM
URL for Spreadsheet calculator web page crown mitre by Stefan 3/10/03 11:40 PM
miter cut for crown mouldings by jack fudadin 11/16/02 09:48 PM
setting angle for cutting crown molding by Carolyn Combs 5/30/03 08:22 AM
How to cut and bevel crown moldings by George Nemeh 7/6/03 10:26 AM
EASY way to Cut crown molding by TL 7/17/03 11:13 AM
cutting crown molding by RC 9/11/03 11:09 AM
re: crown moulding by Steve Ribbing 9/26/03 11:27 AM
tools by Luly 11/10/03 08:48 AM
crown molding by bob andrews 12/9/02 07:04 PM
MITER CUTS FOR CROWN MOLDING by MIKE ROGERS 12/11/02 06:15 PM
cutting crown molding by Danny Letutour 5/8/03 09:11 AM
cutting crown molding by humpfrees4@adelphia.net 8/23/05 07:38 PM
Miter Cuts for Crown Molding by Duane Dawson 7/15/03 02:17 PM
Can I get a copy of the excel spreadsheet? by Kelly Lojka 11/16/03 01:25 PM
Mitre cuts for crown molding/excel spred sheets by Mike McMillan 1/10/04 12:16 PM
compound mitre angle spreadsheet by C Washington 12/13/02 09:30 AM
cutting angle by Eric Jolivet 2/2/03 02:15 PM
angle spreadsheet by miguel 4/19/03 08:00 AM
Compound Mitre Angle Spreadsheet by Bill Warlum 5/24/04 12:47 PM
Miter Excel Sheet by Juan 12/19/02 11:20 AM
Compound Mitre Cut by Bob 2/8/03 08:51 PM
miter excel sheet by Dan Bach 2/21/03 05:05 AM
Excel compond mitter cut by Raouf Bishay 2/18/04 06:38 AM
Excel Sheet on Crown Molding Cuts by David Keeney 12/27/02 07:35 PM
miter excel spreed sheet for crown molding by Larry Crowder 12/29/02 01:32 PM
Crown angles for inside 135 degrees 45/45 by Brent Gibson 12/31/02 10:40 AM
English by Serj Yankian 12/8/03 02:08 AM
excel miter worksheet by Dave Oliver 1/4/03 05:36 PM
Compound miter cuts by Steve Johnson 1/4/03 08:03 PM
Excel worksheet for Crown Molding by Gus Valdes 1/13/03 01:48 AM
Compound Miter Spreadsheet by John Dumelle 2/2/03 04:03 PM
Compound Miter Spreadsheet by Don Owen 7/21/03 06:03 PM
Did my program help? by Jay 8/1/03 11:01 PM
Compound Miter spreadsheet by Dee Kopecky 9/17/03 04:19 PM
Compound Miters Spreadsheet doesn't exist? by Mike 5/19/04 11:36 PM
Miters by doug 5/20/04 08:22 AM
mitre cuts by craig askew 1/30/03 08:49 AM
compound mitre angle formula by Danielle McBurney 2/3/03 07:31 PM
compound mitre angle formula by Jim Shobe 6/10/03 07:12 AM
Jim, did the compound angle drawings help? by Jay 8/1/03 11:37 PM
Excel worksheet please by Dwayne 2/18/03 04:13 PM
Excel spreadsheet-compound miter cuts by jim barnes 2/23/03 10:39 AM
Excel Worksheet for Compound Miter Cuts by Jen Reese 2/24/03 06:11 PM
spreadsheet by Stan Faure 3/14/03 05:33 PM
Compound Miter Cuts by Scott Smith 3/1/03 04:13 PM
Compound mitre cuts by Frank Black 4/15/03 07:01 PM
Excel worksheet please by John Roberts 3/5/03 06:34 PM
excel spreadsheet needed by Michelle 3/6/03 03:56 PM
Excel Spreadsheet by Kevin 3/8/03 04:09 PM
excel sheet by Amy Knecht 3/10/03 06:54 PM
Excel Spreadsheet by Doug Warwick 3/15/03 10:07 PM
Moulding by Michelle 3/28/03 01:55 PM
Ceiling molding with a mitre box by Andy Sromek 4/2/03 01:35 PM
Excel Spreadsheet by Jimmy 3/30/03 07:39 AM
Excel Spreadsheet by Shawn A. Helfer 4/1/03 01:57 PM
mitre cut spreadsheet by Jerry Keefe 4/3/03 11:43 AM
compound angle spread sheet by Tim Larski 4/12/03 09:57 AM
Excel Spreadsheet by miguel 4/18/03 04:34 PM
Excel Spreadsheet by Marty Martone 2/29/04 11:10 AM
Excel Spreadsheet by Susan Fortune 6/22/04 09:23 PM
mitre saw cuts - excel spreadsheet by Ginny 7/12/04 07:13 PM
Calculating compound mitre angles by Tim 4/27/03 09:55 PM
Excel Spreadsheet by Jim Rivera 4/28/03 10:03 PM
Spread Sheet by Roger W. Friedt, Jr. 6/2/03 02:55 PM
Excel Spreadsheet by Brad Barbato 6/9/03 11:42 PM
BRAD, DID MY PROGRAM HELP? by Jay 8/1/03 11:19 PM
Calculating Mitre angles by fred 6/12/03 11:25 PM (: 1, : 1)
i need a copy of the spreadsheet for cutting crown molding by Lenn Knese 6/24/03 10:21 AM
NO NEED FOR SPREAD SHEETS by CK 7/1/03 12:00 PM
Don't waste your money on gadgets by Jay 7/30/03 05:35 PM
Compound Mitre Spreadsheet by Dan Becks 10/21/03 09:15 AM
mitre cuts by Warren Greenwell 12/21/03 08:04 AM
Please send me a copy of the spreadsheet. Thanks by Jon 12/29/03 11:14 AM
spreadsheet for mitre cuts by Steve Lewis 5/1/04 02:17 PM
Mitre Cut Spreadsheet by Jim Cox 5/25/04 06:51 PM
Excel Program by Trevor Miller 5/12/04 08:13 PM
Compound mitre spreadsheet by Barb Nippert 8/31/04 10:59 PM
Excel SPreadsheet for Compund Mitre Saw - Crown Moulding Measurements by lindyloo 12/18/04 10:14 PM
Excel spread sheet by jquatsoe 1/8/05 05:28 PM
chair rail miter cuts by jordanfam10299@yahoo.com 2/15/09 02:12 PM (: 1, : 0)
Crown molding Kitchen cabinet by Mike Sweeney 2/24/03 10:50 AM
Compound Miter Cut for Bar Molding by John Stephan 3/16/03 12:53 PM
Mitre Spread Sheet by Sean Conlin 6/3/03 08:19 PM