crown mold install/angles

Posted by Mark J Hammond on January 27th, 2003 10:19 PM
In reply to Install crown molding by jeffrey Young on January 27th, 2003 06:10 PM [Go to top of thread]

Post Reply |

Watch this Post

I have read all the e-mails sent concerning perfect conditions for cutting crown mold but no one mentions if the walls are off and cutting the molding in the safest position which is flat in the compound miter box. If anyone needs this info let me know I'll be glad to forward it to all. MJH

Was this post helpful? Yes: or No:

Post Reply

Topic History:

Install crown molding by jeffrey Young 1/27/03 06:10 PM

Topic Follow-ups:

Crown Molding Installation by Leonard Aberle 1/28/03 04:12 PM
You can but... by Matt 1/28/03 06:55 PM
crown molding by SANDRA 11/18/03 09:41 PM
crown molding miter cuts by Don Anderson 6/7/03 12:51 PM (: 1, : 0)
vaulted ceiling crown moulding by Bob Mc Gregor 10/26/03 04:33 PM
Vaulted Cuts by Chris 1/24/04 06:41 PM
Vaulted Ceiling Crown Molding by Tim Chadwick 2/4/04 01:51 PM
Vaulted Ceiling Crown Molding by Tim Chadwick 2/4/04 01:53 PM
Crown Moulding Cut Settings by Ron Dietrich 11/22/03 08:14 AM
crown moulding by joe 11/28/03 04:27 PM (: 1, : 0)
Crown Molding Cut Settings by Genaro Mejia 1/1/04 08:05 PM
crown moulding setting by frank woody 12/9/03 10:49 AM
Crown angles by Brett Brown 2/24/04 07:28 PM (: 1, : 0)
Here's a site: by doug seibert 2/24/04 09:32 PM
Crown on slant walls by Larry Hammerberg 7/18/03 07:31 AM
installing crown molding by Bill Rutledge 7/1/03 09:52 PM
cutting crown molding corrctly by cromey 10/9/03 08:10 AM
Installing Crown Molding by Robert L Riddle 2/10/04 05:59 AM
mickey cromey? by sleepnerd 8/24/07 05:38 AM
cutting crown molding using a non-compound miter saw by Larry Whiting 7/17/03 01:46 PM

BobVila.com

crown mold install/angles