Topic History:

• Crown Molding Miter Cuts by Kurt A. Blevins  1/5/98 11:57 AM (: 1, : 1)
• Cutting Crown Moldings - Compound Mitre Cuts by Dan Rudman  1/5/98 03:08 PM (: 1, : 5)
• compound mitre cut by ROGER  3/13/99 02:56 PM
• compound mitre cuts by Frank Vandecruys  8/3/00 04:50 PM (: 1, : 1)
• excel sheet for crown moldings by Ronald Woodruff  10/1/02 06:27 PM
• miter cuts for crown molding by farah h. lowe-bey  10/15/02 02:42 PM
• Crown Molding by Norma  1/11/03 05:13 PM (: 1, : 0)

Topic Follow-ups:

• cutting outside corners for crown molding by jeff  2/26/03 09:26 PM
• crown moldings spreadsheet by Richard  3/16/03 12:19 PM
• crown moldings/spreadsheet by MIKE LAFLAM  4/12/03 08:29 PM
• crown molding spreadsheet by jay strakal  4/13/03 10:50 AM
• Crown mold by Al Threlkeld  4/29/03 04:14 AM
• Awesome way to cut Crown Molding by CK  5/14/03 10:39 AM
• crown mold by kc  6/28/03 03:00 AM
• Angle figuring by TL  7/17/03 11:11 AM
• Thanks for the bum advise, TL by OP  8/2/03 09:59 AM
• You are mistaken by TL  8/11/03 03:26 PM
• Excel spreed sheet by Grayfoxx  5/14/04 10:39 AM
• Crown molding instalation by Sandra McDonald  3/8/04 09:49 PM
• Crown molding instalation by Sandra McDonald  3/8/04 09:59 PM
• Figuring angles the easy and cheap way by Jay  8/1/03 09:20 AM
• crown molding, compound miter cuts by Neil Dodgen  8/4/03 09:44 AM
• crown molding angles by Jim Brochu  1/29/04 02:26 PM
• I Need Help!!!!!! by Janica Jones  2/10/04 07:41 AM
• Cutting base boards by sarroyo33@yahoo.com  11/25/05 03:49 PM
• miter cuts by Cory  4/2/04 09:42 PM
• Here is a nice reply from a happy recipient: by Jay  8/6/03 02:43 PM
• angle spreadsheet by Dave Schweizer  8/11/03 12:37 PM
• Figureing angles posted by Jay Aug. 1, 03 by Tom Dabling  9/18/03 02:40 AM
• miter cuts by scott carruthers  11/28/03 12:27 PM
• 120 degrees outside miter cut by kelvin reese  2/6/04 06:57 PM
• Spreadsheet by Lucy Hickman  10/15/03 02:05 PM
• Spreadsheets for angle cuts by Stacey  5/22/04 10:27 PM
• Recipi of a happy home by Srikanta Chakraborty  12/13/03 01:11 AM
• easy way by steve sheppad  1/6/04 05:51 PM
• Excel-mitre program by Ra  8/11/03 01:49 PM
• I TRIED TO SEND YOU MY PROGRAM by Jay  8/23/03 02:14 PM
• Crown Molding by Bud Henderson  9/14/03 04:12 PM
• crown mold cutting by Jeff Mills  9/18/03 06:22 PM
• Excel Spreadsheet by Callie  1/2/04 10:17 AM
• Excel Miter Sreadsheet by billexecpc  1/25/05 02:27 PM
• crown molding by Dave Ziparo  1/19/04 03:36 PM
• cutting crown molding with miter box by Gene Striebel  8/23/03 11:22 PM
• cutting miters on crown molding by dean  2/19/04 07:10 AM
• crown molding by Peter Katawicz  2/21/04 09:38 PM
• cutting crown molding by Queen Tillman  9/13/03 06:23 AM
• Excel spreadsheet by Scott  3/14/04 07:06 PM
• Crown Molding by Jerry Ivey  10/6/03 08:18 AM
• Crown Molding by Frank  10/22/03 05:48 PM
• Moulding sheet by Al  4/5/04 12:16 PM
• spreadsheet for crown by daryl kitchen  3/5/04 09:48 AM
• HELP!! by Dave Schuster  4/1/03 09:00 PM
• Outside corners for crown molding by Glenn Roberts  4/26/03 02:06 PM
• MITER CUTS by ted lucuk  4/26/03 10:19 PM
• FREE INFORMATION, CROWN MOULDING CUTTING by Jay  7/30/03 04:58 PM
• FREE INFORMATION by Jay  7/30/03 05:55 PM
• Crown Moulding Mitre Corner cuts by Mike Leys  9/26/03 09:53 AM
• CROWN MLD CUTS INSIDE AND OUTSIDE by SCOTT POE  2/13/04 03:03 PM
• Crown Moulding by Doug Platt  2/17/04 06:18 PM
• crown molding by paul reynolds  3/14/04 06:57 PM
• spreadsheet by Jeff Carapella  10/30/03 06:36 AM
• crown moulding cutting by calvin  12/1/03 06:44 PM
• Mitre Cuts--Crown Moulding by Mike Grudis  1/3/04 01:13 PM
• cutting crown moulding by doug brackett  2/23/04 06:28 PM
• corner cabinets crown mould mitre cuts by Calvin  12/1/03 06:31 PM
• Please send your free info, spread sheet by Ron  1/10/04 12:08 AM
• Calculations by Vernon A. Marks  1/12/04 04:57 PM
• Crown Moulding Spreadsheet by Mike Swanick  2/5/04 02:00 PM
• cutting crown on a compound milter 12 inch saw by george englemark  5/16/04 12:24 PM
• cutting crown moulding by Shirley Holloway  1/27/04 10:13 PM
• Crown moulding spreadsheet by Michael Divita  2/7/04 10:23 AM
• Cutting crown rope mouldings by Willie L. Burton  2/26/04 02:39 PM
• cutting rope moulding by John Miller  5/3/04 02:33 AM
• Cutting crown rope mouldings - by Robert B. O'Kane  3/30/04 09:12 PM
• free information by ray bucher  2/8/04 11:17 AM
• cutting crown moulding by Les Toler  2/8/04 02:56 PM
• free information by Tim Peak  2/15/04 10:14 AM
• excel spreadsheet for cutting crown moulding by Traci Brown  2/16/04 10:28 AM
• Cutting Crown Moulding by MIchael Swift  2/16/04 11:09 PM
• Cutting rope crown moulding by Willie L. Burton  2/26/04 02:31 PM
• rope molding by norman  2/26/04 03:02 PM
• speardsheet by Allen Clark  2/26/04 05:09 PM
• Excel spreadsheet by Todd  3/1/04 08:17 AM
• Excel Spreadsheet by Kurt Schmitz  3/15/04 10:28 AM
• Free Information by Michelle Abbe  3/20/04 08:41 PM
• FREE INFORMATION, CROWN MOULDING CUTTING by Joey and Cynthia Rinella  3/23/04 09:54 AM
• Crown Mould Spreadsheet by Shadow Souther  3/30/04 07:49 PM
• cutting crown with unusual returns by ted lucuk  4/19/04 05:49 PM
• CUTTING CROWN MOULDING by MIKE FITZGERALD  5/13/04 09:51 PM
• Crown moulding excel spreadsheet by David J  5/22/04 01:57 PM
• Cown Moulding Spreadsheet by cindy vu  6/27/04 03:03 PM
• FREE INFORMATION, CROWN MOULDING CUTTING by Leon Floyd  7/4/04 12:49 AM
• FREE INFORMATION, CROWN MOULDING CUTTING by RICHARD FRIESS  7/8/04 03:45 PM
• miter cuts by jesusr  10/16/04 11:22 PM
• download spreadsheet from this site by carl21l  10/17/04 12:03 AM
• Excel spreadsheet by sahocken  1/30/05 07:40 PM
• spreadsheet by Dave Schweizer  8/11/03 12:38 PM
• speadsheet by Keith  10/6/03 05:12 PM
• Outside Corner cuts on crown molding by CK  5/14/03 10:49 AM
• Reply to CK by LC  8/1/03 09:37 AM
• Crown Molding Jig by CK  8/1/03 02:13 PM
• Compound Miter Jig from Rockler by CK  8/1/03 02:16 PM
• MY FINAL REPLY TO CK AND TL by Jay  8/1/03 06:08 PM
• HELP!! by Dave Schuster  4/1/03 09:01 PM
• Crown Molding cuts by Sam Clark  5/8/03 07:05 AM
• cutting corners fro crown molding with miter saw by Frank Rao  10/4/03 12:08 PM
• angles to cut crown molding flat on a miter saw by dennis j. makielski  2/1/04 01:58 PM