---
title: "How To: Fix a Sagging Closet Pole"
description: "Here's how to fix a closet rod that is sagging under the weight of the clothes they need to carry. As DIY projects go, this is as easy as it gets!"
date: "2013-05-30"
modified: "2020-10-07"
authors:
  - name: "Joe Provey"
    job_title: "Contributing Writer"
    link: "https://www.bobvila.com/authors/joe-provey.md"
url: "https://www.bobvila.com/articles/how-to-fix-a-closet/"
categories:
  - "DIY"
  - "Skills & Techniques"
tags:
  - "closets"
  - "How To"
---

# How To: Fix a Sagging Closet Pole

![Pole used to prop sagging closet rod.](<https://www.bobvila.com/wp-content/uploads/2013/05/Howto-Cure-ClosetRod-Sag-JProvey-1.webp>)
*A simple prop holds the closet rod level under the heaviest of loads. Photo: JProvey Photo: JProvey*

My wife and I recently reorganized our bedroom closet and added several new accessories, including a double rod hanger, canvas shoe cubbies, and a column of hanging shelves. We were really happy with the results, but our closet rod wasn’t. It sagged, and then sagged some more with every item we hung on it. Fortunately, I had some wooden closet pole left over from another project and used it to build a prop. While I was at it, I added some dowels for my wife to hang her belts and handbags. Now we’re all happy—no more sag and another place to hang stuff. The total cost was under $10.

Skill level: This is about as easy as it gets, but you need to be comfortable with an electric drill.

**MATERIALS AND TOOLS**
- Handsaw
- Miter box
- Drill
- 1” diameter spade bit
- ¼” diameter twist drill
- 1-3/8" wood closet pole
- ¼” dowel
- Paint and small brush (optional)
- Beads to cap ends of dowels

## How to Fix a Closet Pole

### Step 1

Carefully measure the height of your closet rod. Be sure to measure the height it’s supposed to be, not the height with the rod deflection. Mark this height on the wood closet pole, then bore a hole in the pole so that the bottom of the hole is at the marked height.

![Drilling hole in wood closet pole](<https://www.bobvila.com/wp-content/uploads/2013/05/Howto-Cure-Sagging-Closetrod-JProvey-2.jpg>)
*Photo: JProvey*

### Step 2

Saw through the hole to create a notch on which the closet rod can rest.

![Sawing closet rod to make pole support](<https://www.bobvila.com/wp-content/uploads/2013/05/Howto-Cure-Sagging-ClosetRod-JProvey-3.jpg>)
*Photo: JProvey*

### Step 3

Bore ¼” diameter holes near the top of the pole and insert ¼" dowels.

![drill holes to insert wood dowels](<https://www.bobvila.com/wp-content/uploads/2013/05/Howto-Cure-Sagging-Closetrod-JProvey-4.jpg>)
*Photo: JProvey*

### Step 4

Bore 1/4" holes in plastic, wood, or clay beads. For [safe drilling](<https://www.bobvila.com/articles/how-to-use-a-drill.md>), first secure the beads in a clamp or vise with padded jaws. Then place the beads on the ends of the dowels.

![Drilling hole in wood beads](<https://www.bobvila.com/wp-content/uploads/2013/05/Howto-Cure-Sagging-ClosetRod-JProvey-5.jpg>)
*Photo: JProvey*

## Sagging Shelves

Now that your tools are out, take the opportunity to check your bookcases and [cabinets](<https://www.bobvila.com/articles/kitchen-cabinet-styles.md>) for sagging shelves. Much of today’s storage furniture comes with 5/8"- or ¾"-thick melamine-laminated particleboard shelves. They hold up fine if the spans are two feet or less and if the load limits are not exceeded. For wider cabinets, however, sagging shelves are a common problem.

Measure the distance between the cabinet bottom and the underside of the sagging shelf. Measure where the shelf meets the side of the cabinet so you get the correct height for the shelf, not the height where the shelf has sagged. Then cut two strips of 1⁄4" x 1" wood to that length. Attach one to the cabinet back and the other behind the center stile. Together, they will prevent the shelf from sagging. Use double-sided tape to attach the wood strips so they can be removed if you decide to change the shelf height in the future.

![Supports for sagging cabinet shelves](<https://www.bobvila.com/wp-content/uploads/2013/05/Howto-Support-Sagging-Cabinet-shelves-JProvey6.jpg>)
*Wide shelves made of particleboard are likely to deflect under heavy loads. Make these simple shelf supports to solve the problem. Photo: JProvey*

To add support to multiple shelves, place additional wood strips under the next highest shelf in the manner described above. Don’t skip a shelf, however. The load must be carried to the cabinet bottom.

## Author
Joe Provey is an expert on all things home and garden. His work has appeared in many national magazines, including [Popular Mechanics](<http://www.popularmechanics.com/>), [House Beautiful](<http://www.housebeautiful.com/>), [Better Homes & Gardens](<http://www.bhg.com/>), and [Fine Homebuilding](<http://www.finehomebuilding.com/>). Mr. Provey has also written more than dozen books, including [*Convert Your Home to Solar Energy*](<https://www.amazon.com/Convert-Your-Home-Solar-Energy/dp/1600852521?tag=bv-untagged-20>) and [*1001 Ideas for Kitchen Organization*](<https://www.amazon.com/Ideas-Kitchen-Organization-Creative-Homeowner/dp/B0036DE4B4/ref=sr_1_2?s=books&ie=UTF8&qid=1534346633&sr=1-2&tag=bv-untagged-20>)*.* Other titles include *Outdoor Kitchens, Easy Closets, Green-up Your Cleanup, and Design Ideas for Flooring.* Currently, Mr. Provey serves as the president of Home & Garden Editorial Services (HGES), a company that produces books for publishers in the home and garden category. In the past, he has been chief editor to several national home improvement magazines, including [The Family Handyman](<http://www.familyhandyman.com/>), Mechanix Illustrated, and Practical Homeowner. Joe lives in Bridgeport, Connecticut, with his wife MaryAnn, where they have seven children and four grandchildren between them.

### Author social links  
[LinkedIn](<https://www.linkedin.com/in/joe-provey-08121aa/>)