How To: Test for Asbestos

Discovering if this highly toxic, widely used material is present in any area you may want to demo is absolutely necessary. Learn why—and how—right here.

By Steffani Cameron and Bob Vila | Updated Jan 6, 2021 10:18 AM

We may earn revenue from the products available on this page and participate in affiliate programs.

How to Test for Asbestos Before Demolition

Photo: istockphoto.com

For a century, the naturally occurring fibrous silicate mineral asbestos was a mainstay of the building industry, used to create products of all kinds. Due to its strength and heat-resistance, it was widely used in flooring (including vinyl tiles), popcorn ceilings, insulation, concrete, ductwork, and much more.

Like a sleeping monster, asbestos lurking in building materials poses no risks unless and until it’s disturbed, at which point its dust becomes extremely dangerous. So it’s crucial to test for asbestos prior to any demolition. Otherwise, the microscopic fibrils in asbestos are so abrasive once broken down that, if inhaled, they can cause lung-scarring illnesses and even lung cancer.

Get a professional consultation
Find licensed asbestos abatement experts in your area and get free, no-commitment estimates for your project.
+

Because asbestos can’t be seen with the naked eye, materials must be submitted to laboratory certified by the Environmental Protection Agency (EPA) for testing prior to a remodel. Even removing a sample to send to the EPA requires stringent precautions, and in many states it’s illegal to do sample removal yourself.

In nearly all states, if you live in an attached house, testing and sample removal generally requires EPA-certified contractors. If your state does allow self-gathering of samples in detached housing, you can purchase a kit for between $30 to $60 (view example on Amazon), making sure to follow these instructions for how to test for asbestos to the letter.

Note: Despite evidence of toxicity first arising in 1899, asbestos remained widely in use in a vast number of construction materials until the 1980s and continues to have construction applications to this day (see a complete list compiled by the EPA). Keep in mind that asbestos use was so pervasive and insidious, it could be in nearly anything but the wood in your home—from countertops to insulation, wiring, carpet underlay, and more. If you have serious asbestos concerns, the wisest move is to have a contractor perform a thorough testing before any demo begins.

Tools & Materials
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

How to Test for Asbestos

 

Step 1: Do not in any way disturb the area you area testing.

Do not attempt to clean any item or area you intend to collect a sample from, in case asbestos also exists in the surface dust. Ensure still air in your work area so that any microscopic fibers do not become airborne. Shut all the windows and doors and turn off all fans, heaters, and air conditioning systems that circulate air.

Step 2: Outfit yourself in disposable protective gear.

Don all of your protective gear: face mask, gloves, coveralls (or long sleeves and long pants), and shoe covers. You’ll need to discard whatever you’re wearing during asbestos removal, so spending $5 to $10 on disposables is well worth it. Do not allow anyone in the area who is not wearing protective gear.

Step 3: Blanket the work area in plastic sheeting and mist all surfaces with water.

Lay plastic sheeting around the work area to catch any potential asbestos dust that may settle. Spray the entire area thoroughly with water, so that all the surfaces are misted and the air is humid. This will help ensure that any disturbed dust quickly settles.

Step 4: Carefully isolate a material sample and mist it with water.

Working as passively as possible to minimize dust, use a utility knife or chisel to loosen a sample of the material you wish to test. The sample must weigh between 5 grams and 100 grams (just under 1/4 lb). Without touching the loosened sample, spray it down with water and mist the air around you.

Step 5: Use protected pliers to transfer the sample to a zip-locking plastic bag.

Place a wet wipe in the mouth of the pliers, which will prevent microscopic fibers from sticking to the pliers. Carefully pick up the sample with the pliers and place it inside a zip-locking plastic bag. Drop the wet wipe in as well.

How to Test for Asbestos and Remove Health Hazards Before Demo Day

Photo: istockphoto.com

Step 6: Seal and label the zip-locking plastic bag.

Seal the plastic bag. At the top of the bag, neatly print the following information in reasonably small letters: where the sample was taken, the date of collection, and what the sample contains. Now place this sealed bag into a second zip-locking plastic bag to be sure it stays secure. Mist the air one more time to ensure dust settles.

Step 7: Carefully dispose of the plastic sheeting laid in Step 3.

Carefully fold up the plastic sheeting and dispose of it in a plastic trash bag. Fold down the top of the plastic bag and securely tape it shut to contain any fibers.

Step 8: Vacuum the testing area and carefully dispose of the vacuum’s contents.

Thoroughly vacuum the area. Once done, carefully replace the vacuum bag and dispose of the old one in a plastic trash bag, taping the bag shut as you did with the plastic sheet, to contain particles. If you use a bagless vacuum, put the canister inside a trash bag and carefully tap out all dirt and dust. Use a wet rag to thoroughly wipe the canister down. Dispose of this rag in a plastic trash bag. Repeat the wipe-down with a wet wipe or two, just to be thorough. Dispose of these along with the rag.

Step 9: Clean the area with moistened cloths, the carefully dispose of the cloths.

Clean the entire work area and anything nearby where dust may have landed with another wet rag. Dispose of the rag with the others, and tape that bag closed.

Step 10: Paint over the area from which you loosened a sample (then discard the paintbrush).

Seal the area from which you took the sample by applying a thick, thorough coat of any kind of paint. When the paint dries it will prevent any more dust from kicking up. Discard the paintbrush in a plastic bag.

Step 11: Carefully remove and dispose of the protective gear worn during the process.

Carefully remove your coveralls or clothes, facemask, and gloves, and dispose of them in the trash bag with the paint brush and tape it up. Dispose of all trash correctly.

Step 12: Send the collected sample to an EPA-certified asbestos-testing lab.

Check the National Voluntary Laboratory Accreditation Program for a list of EPA-certified asbestos-testing lab that will take your sample, and follow their instructions for submission. It can take three weeks or more for a response to a sample collected by a homeowner, so plan ahead and be patient. Samples collected by EPA-certified professionals can be tested in as little as 48 hours, which may make the premium of paying a pro worth it for you.

If your sample tests positive for asbestos: Find an EPA-certified contractor to begin asbestos removal. It is illegal in many states to do asbestos removal yourself, and you can be heavily fined for doing so. Removal of, or simply sealing up and disposing of asbestos (since you can’t just take it to a landfill), requires a special contractor’s license in most states. The many uses of asbestos in homes, its insidiousness, and the complicated process of delicately removing it mandate that asbestos removal is not a project even the most ambitious of DIYers should ever undertake.

Get a professional consultation
Find licensed asbestos abatement experts in your area and get free, no-commitment estimates for your project.
+