Chase Away Winter’s Chill with Radiant Heat
On those frigid mornings, wouldn't you love comfortable, even heat throughout your home, and a floor that's warm beneath your feet? Consider the benefits of a radiant floor heating.
Drafts got you down? If your goal is to achieve even, comfortable heat and warm floors, then you may want to look into installing a radiant heating system for your home.
Radiant heating systems, which are typically installed in or below the floor of your home, distribute heat evenly and comfortably. The heating coils first warm up the floor. The heat radiates gradually throughout the room, warming any furnishings and surfaces in its path—which then give off warmth in turn. Everything in the room becomes snug and toasty while the overall air temperature remains comfortable, not stultifying.
“Radiant heat holds many advantages over typical convective heating methods,” notes Daniel O’Brian, a technical expert from online retailer SupplyHouse.com. “Radiant systems heat the whole room evenly, so there is no ‘cold at the floor, hot at the ceiling’ effect. They will even heat the surface of the objects in the room, greatly increasing comfort.”
Related: Radiant Floor Heating 101
“Because airflow is negligible in a radiant system, there is less heat loss due to drafts, and in general the thermostat can be set lower while remaining comfortable,” O’Brian continues. “On top of that, the water temperature required for a radiant system is much lower than for traditional systems. A properly configured radiant system can save you big bucks on utilities.”
Radiant heat is not only comfortable, but also aesthetically pleasing, because all of the components are tucked away out of sight—there are no radiators, baseboard heaters, or hot air returns in view. Radiant heat is also silent, eliminating much of the banging, whistling, creaking, popping, rattling, and humming associated with conventional heating systems.
There are two primary types of radiant heating systems, hydronic and electric. Hydronic systems are the most common and use hot water passing through PEX tubing to heat a space. In contrast, electric radiant systems provide heat through electric cables or mats. Radiant heat can be installed in both new construction and in existing homes, and there are several different types of installations available, depending on the home’s construction. For example, hydronic tubing can be installed in a cement foundation when it is initially poured, or the tubing can be installed in an “over-pour” on an existing foundation. Tubing also can be installed in between the floor joists with or without plates, or it can be installed above the subfloor using a specialty product such as Quik Trak.
Radiant heat is also an energy-efficient option for many homeowners. Although the initial installation cost may be 10 to 25 percent more expensive than a conventional heating system, a properly designed and maintained radiant heating system can cost 25 to 50 percent less to run and maintain. Also, the life expectancy of a radiant heat system is typically 30 to 45 years, double or even triple the 10- to 25- year life expectancy of a traditional forced-air furnace. Radiant heat can also increase the value of your home at resale, because these systems are considered a highly desirable option among home buyers.
SupplyHouse.com offers a large selection of products and packages for installing radiant heating systems from the top manufacturers in the industry. For more information, including a radiant heat calculator, visit SupplyHouse.com.
This post has been brought to you by SupplyHouse.com. Its facts and opinions are those of BobVila.com.