---
title: "Crucial Snow Blower Maintenance Tasks to Complete Before the First Snow"
date: "2026-11-21"
modified: "2026-11-21"
authors:
  - name: "Sandi Schwartz"
    job_title: "Contributing Writer"
    link: "https://www.bobvila.com/authors/sandi-schwartz.md"
url: "https://www.bobvila.com/exterior/snow-blower-maintenance/"
categories:
  - "DIY"
  - "Driveways & Walkways"
  - "Exterior"
  - "Repair & Maintenance"
---

# Crucial Snow Blower Maintenance Tasks to Complete Before the First Snow

![Man pushing a snowblower in a yard.](<https://www.bobvila.com/wp-content/uploads/2026/11/shutterstock_1837136563-e1795213011724.jpg>)
*Photo: N-sky via Shutterstock*

Imagine your frustration when your driveway is covered in snow after the first winter storm, but your snow blower won’t start. As winter approaches, it’s time to make sure your snow blower is ready to tackle that first snowfall. You’ll want to take a few steps to check that it’s tuned up and ready to go without a hitch. We spoke to Sean Dwyer, senior product manager for commercial and residential wheeled products at [Husqvarna Group North America](<https://www.husqvarna.com/us/>) to identify the top snow blower maintenance tasks to prioritize so you are prepared when the first snowflake falls.

## Add fresh fuel.

By far the most important step is to make sure you have a fresh supply of fuel, says Dwyer. “If you have regular pump fuel, it should be less than 30 days old, and ideally premium grade that’s a non-ethanol blend,” he explains. [Fuel can go stale over time](<https://www.bobvila.com/articles/how-long-does-gasoline-last.md>) and gum up the snow blower’s carburetor. Dwyer recommends running the unit out of gas before storing it. “Otherwise, at a minimum, purchase stabilized canned fuel or add a fuel stabilizer.” Gasoline with a stabilizer typically lasts for about 4 to 6 months.

![Person pouring gas into a snow blower tank from a red container.](<https://www.bobvila.com/wp-content/uploads/2026/11/shutterstock_2584503601-e1795213303619.jpg>)
*Photo: mailcaroline via Shutterstock*

## Conduct a seasonal pre-check

Spend some time reviewing the key components of the unit. “This means [checking engine oil](<https://www.bobvila.com/reviews/best-oil-for-snow-blower-options.md>) and tire pressures, and also [starting the unit](<https://www.bobvila.com/articles/snow-blower-wont-start.md>) to ensure proper wheel drive and auger operation,” notes Dwyer. “This is also a good time to shut the fuel off and run the carburetor dry to give your [snow blower](<https://www.bobvila.com/articles/best-snow-blower.md>) the best chance of a successful operation when you need it.”

In addition, pay attention to these additional parts of the snow blower:

- Inspect tires for wear and tear, replacing them if necessary.
- If you have chains for your tires, either put them on in advance or make sure they are ready.
- Tighten any loose nuts, bolts, or screws.
- Replace the belts if they are frayed, stretched, or cracked.
- Replace the starter cord if there is any evidence of fraying.
- Inspect the rotor blades for wear, and replace the blade edge if it has worn down to the wear indicator hole.
- Check the fuel line, tank, cap, and fittings for cracks or leaks.
- Make sure the operator control levers, such as the power steering trigger, chute, and speed selector, are functioning properly.

## Check battery health of electric snow blowers.

Battery-powered snow blowers are convenient, but it’s important to recognize that cold weather and batteries don’t typically work well together, warns Dwyer. Checking battery health is part of regular [snow blower maintenance](<https://www.bobvila.com/articles/how-to-maintain-a-snow-blower.md>). Rechargeable batteries can degrade over time, and won’t be able to hold as much charge as they age as they do when new. He recommends keeping fully charged batteries in the house or a location where they will remain above freezing temperatures. “If everything is in the cold garage, there is a good chance they won’t work when you need them to,” he explains. “Also, remember that when you are done, bring the batteries back to a warm place so they are ready to go next time.”

![Man installs a snowblower auger drive belt.](<https://www.bobvila.com/wp-content/uploads/2026/11/shutterstock_2823949745-e1795213326503.jpg>)
*Photo: Kobzev Dmitry via Shutterstock*

## Replace shear bolts.

Snow blowers typically contain shear bolts (also called pins) as a safety feature. The shear bolts are [designed to break](<https://www.bobvila.com/articles/snow-blower-mistakes.md>) to protect the auger gears from damage if the unit runs into hard objects like ice from a [blizzard](<https://www.bobvila.com/interior/how-to-prepare-for-a-blizzard.md>). There is typically one pin on each auger and one or two on the impeller.

To change these components, wear protective gloves. “With the engine shut off, try to rotate each individual auger by hand,” says Dwyer. “You should not be able to rotate the augers, and the shear bolts will be visually present.” To check the impeller, look for the shear bolts, or hold one of the augers firmly, and slowly try to turn the impeller. “Be careful when checking the impeller, as it is tied to the shaft that will drive the augers.”

If these items [spin freely](<https://www.bobvila.com/articles/best-non-stick-spray-for-snow-blowers/>), the shear bolt is likely damaged or missing, says Dwyer. Replace any missing or broken bolts to protect your snow blower. It’s a good idea to always keep a stash of shear bolts on hand.

## Adjust the skid shoes.

Designed to wear down with use, skid shoes help keep a snow blower’s housing at the correct height and also protect your pavement. They are located on the lower sides of the auger housing and are designed to hold the scraper, located at the bottom of the auger housing, just above the ground, says Dwyer. “As these shoes wear, the scraper will contact the ground and wear will increase,” he explains.

“A simple way to adjust the shoes is to sit the snow blower scraper on something around ¼ inch thick, like a paint stir stick, and then loosen the bolts holding the shoes to adjust them down to contact the ground and retighten,” suggests Dwyer.

## Author
Sandi Schwartz is an environmental author and freelance journalist with over 20 years of extensive experience communicating science-based information to diverse audiences in the areas of sustainability, home/garden, green living, nature, and wellness. Sandi began writing for BobVila.com in June 2022.

### Author social links  
[LinkedIn](<https://www.linkedin.com/in/sandischwartz-environmentalwriter>)

## More

- [How to Maintain a Snow Blower: Top Tips for Peak Performance](<https://www.bobvila.com/articles/how-to-maintain-a-snow-blower.md>)
- [2026’s Best Snow Blowers for Gravel Driveways, Tested and Reviewed](<https://www.bobvila.com/reviews/best-snow-blower-for-gravel-driveways.md>)
- [The Best Snow Blowers for Gravel Driveways of 2026, Expert Picks](<https://www.bobvila.com/articles/best-snow-blowers-for-gravel-driveways.md>)
- [The Best Lawn Mower Snow Blower Combos of 2026—Expert Picks](<https://www.bobvila.com/articles/best-lawn-mower-snow-blower-combos.md>)
- [11 Snow Blower Mistakes to Avoid This Winter](<https://www.bobvila.com/articles/snow-blower-mistakes.md>)
- [Snow Thrower vs. Snow Blower: What’s the Difference? ](<https://www.bobvila.com/diy/snow-thrower-vs-snow-blower.md>)
- [The Best Ego Snow Blowers for Any Driveway, Tested](<https://www.bobvila.com/reviews/best-ego-snow-blowers.md>)
- [The Best Snow Blowers of 2026, Tested and Reviewed by Our Experts](<https://www.bobvila.com/articles/best-snow-blower.md>)
