Took a look at an a/c coil above a new furnace and took a picture.
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries
We had a TimberTech deck installed about 2 years ago. After about 1 year the we noticed the deck boards had swelled and the gap between them was go...
We had a Trex deck installed in 2004. We choose to use the non-groovey side, Winchester Gray color. The deck is not slippery and cleans easily when...
So we're 90% complete with a big front-yard landscape project which included a paverstone driveway, walkways and landscape. This is being done by a...
I recently bought a used thinking outside building and have it erected. However, I need at least 6 additional screws for it. I had to borrow from...
Dose anyone have a copy of the manual for 536 906000. I need to change the augar belts and can't seem to find any info about this.
I have finally found the probable primal nest under my front redwood deck, which they have laid to waste, but they're not active right now. Accordi...
A fence contractor is replacing my old fence on my yard but 10% of the wood pickets are warped and some very knotty. Are there different quality gr...
I'm needing instructions and parts for thinking outside deluxe shed Part 44025
Our neighbors have a 75 foot Cedar tree which sheds over onto our yard. We have purchased several rakes but none seem to work - to pick up all of t...
Ok, I'm one of the many people with a Trex problem. What are we to do? I just purchased a home with Trex decking. The decking is coming apart. Whe...
both used; one working and one with a broken plastic gear. Also one has newly crafted custom tines much thicker and stronger than stock tines. Con...
I have a 45ft by 25 ft area to cover but greenhouses of this size will be too expensive. What can I use? I live in North GA and I have banana trees...
How can I tell if our concrete steps (one piece) was made from a form or built with blocks underneath? Our house was built in 1986. Who would we ...